On Unix-like operating systems stdio.h is usually line-buffered. As
putStr uses fputs(3) from stdio.h internally, output will be written to
standard out after a newline character is written to the buffer. Since
the prompt does not contain a newline, it will only be written to
standard output after the user presses return. I encountered this issue
on Alpine Linux which uses musl libc (instead of glibc). However, I
believe this issue is likely also reproducible with glibc. This commit
fixes this issue by flushing standard output after writing the prompt to
it. Surprisingly, `src/Idris/IDEMode/REPL.idr` already does this
correctly, `src/Idris/REPL.idr` does not though.
If they're big, they take a long time to instantiate, and if they
consist of a lot of functions, chances are that normalising them will
make them much smaller. This significantly improves type checking
performance for some programs with lots of type level computation going
on.
The threshold is set with %nf_metavar_threshold, but the default value
of 50 is probably fine. Set it to 0 to always normalise metavar
solutions, or something higher than 1000 to essentially never do it.
It's roughly a count of nodes in the typechecked syntax tree under the
first function application.
Given we keep getting tripped up by this, here we go:
* Namespaces
* Data names
* Record names
* Data constructor names (except for operators)
* Record constructor names (except for operators)
* Interface constructor names (except for operators)
`.proj` and `proj` are identically defined but separate functions.
This patch fixes it by defining `.proj` only once, and adding `proj = (.proj)`
for every projection.
This avoids resugaring to the wrong type when there are user defined
symbols which conflicts with builtins such as Pair.
Changed the test linear002 which was relying on this behaviour for a
user defined Unit.
Fixes#634.
We've always just used 0, which isn't correct if the function is going
to be used in a runtime pattern match. Now calculate correctly so that
we're explicit about which type level variables are used at runtime.
This might cause some programs to fail to compile, if they use functions
that calculate Pi types. The solution is to make those functions
explicitly 0 multiplicity. If that doesn't work, you may have been
accidentally trying to use compile-time only data at run time!
Fixes#1163
This tells Idris where to look for packages in addition to the default
places (under $PREFIX and ./depends/). This should allow package
managers a bit more flexibility.
When bootstrapping, we're building things without packages being
available, so we can't expect to find them when looking for
dependencies. So, we find them another way, with an environment
variable. This flag is to tell Idris not to worry about missing
dependencies in this situation.
We also need to update the bootstrapping code, to deal with the new
version number format and new flag in the ipkg files for the libraries.
I think it's still safe to build from the previous version though - lets
see if CI agrees!
Now reporting an error if we can't find a package that satisfies the
constraints. The version number field can still be a string (as it used
to be) but will give a deprecation warning - and the old style version
string wasn't used anyway.
Version constraints can have an upper and/or lower bound, which can be
inclusive or not.
Packages are now installed in a directory with their version number.
On adding a package directory, we now look in a local 'depends'
directory first (to allow packages to be installed locally to another
project) before the global install directory.
Dependencies can have version bounds (details yet to be implemented) and
we pick the package with the highest version number that matches.
Add wrap on file end
use rust-style raw string syntax
use swift style syntax raw string
Update src/Parser/Support.idr
Co-authored-by: André Videla <andre.videla@gmail.com>
Escape line wrap
Resolve conflict
Until yesterday I did not know Idris2 accesses environment variables.
Mentioning them in `--help` would educate other users.
Not all descriptions make sense, I tried my best to guess them.
Output is: [link](https://gist.github.com/stepancheg/7d1dff344a0dd35b9d07fb4a417ecb32).
It's disappointing to have to do this, but I think necessary because
various issue reports have shown it to be unsound (at least as far as
inference goes) and, at the very least, confusing. This patch brings us
back to the basic rules of QTT.
On the one hand, this makes the 1 multiplicity less useful, because it
means we can't flag arguments as being used exactly once which would be
useful for optimisation purposes as well as precision in the type. On
the other hand, it removes some complexity (and a hack) from
unification, and has the advantage of being correct! Also, I still
consider the 1 multiplicity an experiment.
We can still do interesting things like protocol state tracking, which
is my primary motivation at least.
Ideally, if the 1 multiplicity is going to be more generall useful,
we'll need some kind of way of doing multiplicity polymorphism in the
future. I don't think subtyping is the way (I've pretty much always come
to regret adding some form of subtyping).
Fixes#73 (and maybe some others).
Local hints need to reduce (just like global hints do) so we expand
their definition to the lifted name before applying them.
We're identifying the global hints by knowing that the binder name is a
nested function name. This is a bit of hack, and it'd probably be better
to record that information in the binder instead, but that's a more
substantial change than I want to do right now.
This gives us the ability to define and use implementations locally, in
where clauses/local let bindings, as well as flag local definitions as
hints.
It's not yet quite equivalent to global hints, however, since it translated
the hint to a local let binding, which doesn't reduce, so if something
relies on the reduction behaviour of the hint, it won't work. This
refinement is coming later
+ Expanded the documentation on how to use literate modes.
+ Added invisible code blocks in Markdown using specially tagged comment blocks: `<!-- idris -->`.
+ Fixed OrgMode specificaton to recognise comment blocks properly.
This involves a small extension to IPragma, because to properly
elaborate names in a local scope we need to know which names are defined
in that scope so that they get applied to the environment when needed.
This means we can now define implementations of interfaces locally (but
there's still some work to do, because we don't yet have a way of
applying locally defined hints in auto search. It's coming soon!)
This allows, for exmaple, to have apostrophes in module names.
Test was added only for chez, however this should be viable for all
targets with `:exec` implemented.
module, then the current namespace (accessed by calling getNS) differs
from the function namespace, therefore it is not considered visible by
TTImp.Elab.App.checkVisibleNS
Gambit after version v4.9.3 supports the -cc option, which configures
the compiler backend Gambit will use to build the binary. Currently to
get this functionality Gambit needs to be built from source, since it is
not yet available in a released version.
This builds a .o from the generated C, and statically links with the
libidris2_support library. It doesn't yet dynamically link with any
additional libraries.
Written by Volkmar Frinken (@vfrinken). This is intended as a
lightweight (i.e. minimal dependencies) code generator that can be
ported to multiple platforms, especially those with memory constraints.
It shouldn't be expected to be anywhere near as fast as the Scheme back
end, for lots of reasons. The main goal is portability.
Things like (,) () aren't straightforward IVar's but are IAlternative's
which present options about how the term should resolve. [| |] was not
accounting for this.
`Core.Context` is 2k+ LoC and contains a *lot* of different thins.
Rather than moving the `log` functions above of `addData` to be able
to add logging there, fork them off to independent files to make the
whole thing more readable.
Nipping this historical artifact in the bud before it roots. It's often
useful to be able to `map` directly to the result of a StateT computation
and due to how Functor works this is made harder when the tuple is
(a,state) vs (state,a)
There's some missing flexibility in how foreign specifiers can be used with
scheme that is addressed here with minimal changes to how scheme specifiers
are read. This opens up uses for users that they otherwise would have had
to modify the compiler's support files to accomplish.
When synthesizing clauses, allow synthesised clauses to be
partial.
It's an arbitrary choice, the other choice can be the default
option. But if the place in which we're synthesising has a non-default
choice, then we're synthesising under the wrong option too.
Auxiliary functions introduced in elaboration (e.g., through case splits and with clauses) now
have the same totality annotation as the function they're defined in.
Moved auxiliary function `findSetTotal` into `Context.idr` since it's
now used by `ProcessDef.idr` too.
Added a totality requirement argument to `checkClause` so that the
with-clause case could propagate it to the functions it generates in
elaboration.
Sandwhich the rhs elaboration in pattern matches with code that sets
the global, default, totality requirement to the current one, and
restores the previous default afterwards. It's a bit of a hacky way to
do it, but I don't think we have a better alternative with the current
design.
Until now namespaces were stored as (reversed) lists of strings.
It led to:
* confusing code where we work on the underlying representation of
namespaces rather than say what we mean (using `isSuffixOf` to mean
`isParentOf`)
* potentially introducing errors by not respecting the invariant cf.
bug report #616 (but also name generation in the scheme backend
although that did not lead to bugs as it was self-consistent AFAICT)
* ad-hoc code to circumvent overlapping interface implementation when
showing / pretty-printing namespaces
This PR introduces a `Namespace` newtype containing a list of strings.
Nested namespaces are still stored in reverse order but the exposed
interface aims to support programming by saying what we mean
(`isParentOf`, `isApproximationOf`, `X <.> Y` computes to `X.Y`, etc.)
irrespective of the underlying representation.
Until now namespaces were stored as (reversed) lists of strings.
It led to:
* confusing code where we work on the representation rather than say
what we mean (e.g. using `isSuffixOf` to mean `isParentOf`)
* potentially introducing errors by not respecting the invariant cf.
bug report #616 (but also name generation in the scheme backend
although that did not lead to bugs as it was self-consistent AFAICT)
* ad-hoc code to circumvent overlapping interface implementations when
showing / pretty-printing namespaces
This introduces a Namespace newtype containing non-empty lists of
strings. Nested namespaces are still stored in reverse order but the
exposed interface aims to support programming by saying what we mean
(`isParentOf`, `isApproximationOf`, `X <.> Y` computes to `X.Y`, etc.)
irrespective of the underlying representation.
