This is first draft; the animation rate is currently tied
to the cursor_blink_rate setting, so if the gif has frames that
are intended to display more frequently than that, they will
animate more slowly.
Animation is only carried out while the window has focus.
Animation increases the load on the GPU and thus uses more power.
It's kinda fun to stick one of these animated pixel gifs in the background:
https://imgur.com/gallery/F9DAH
During a live resize, we could queue up a lot of `window-resized`
events, which is undesirable.
This commit introduces a simple but effective mechanism to manage this;
a given event can have at most one executing and one pending copy.
So if we get a burst of resize events (eg: during a live window resize)
that might have previously queued hundreds of discrete events, we now
get a more manageable situation with 1 executing and 1 queued.
With this change, a given event can only have 1 executing instance at a
time (with the exception that the open-uri event doesn't go through this
mechanism).
refs: https://github.com/wez/wezterm/issues/291
The previous behavior was to always treat ctrl-alt as altgr on Windows,
this has been done to better support altgr through a VNC session,
but this is very unintuitive when you don't need this behavior.
ref: #472
This is to support <https://github.com/wez/wezterm/issues/291>.
The window resized event happens asynchronously wrt. processing
a window resize, triggering at the end of the normal window
resize handling.
This commit introduces the notion of whether we are in full screen
mode or not in the underlying event callback, which is useful to
gate the desired feature, which is: when in full screen mode,
increase the padding for the window to center its content.
While poking around at this, I noticed that we weren't passing
the per-window config down to the code that computes the quad
locations for the window.
This commit also changes the font size increase/decrease behavior
so that in full screen mode it doesn't try to resize the window.
```lua
local wezterm = require 'wezterm';
wezterm.on("window-resized", function(window, pane)
local window_dims = window:get_dimensions();
local pane_dims = pane:get_dimensions();
local overrides = window:get_config_overrides() or {}
if not window_dims.is_full_screen then
if not overrides.window_padding then
-- not changing anything
return;
end
overrides.window_padding = nil;
else
-- Use only the middle 33%
local third = math.floor(window_dims.pixel_width / 3)
local new_padding = {
left = third,
right = third,
top = 0,
bottom = 0
};
if overrides.window_padding and new_padding.left == overrides.window_padding.left then
-- padding is same, avoid triggering further changes
return
end
overrides.window_padding = new_padding
end
window:set_config_overrides(overrides)
end);
return {
}
```
I'm calling it a temporary defeat on the shaping changes;
this commit effectively reverts the series of changes made
to support slicing up ligatures like `->` when the cursor
moves through them.
They've introduced so many issues and I've spent hours
that haven't resulted in a complete solution, so I've
disabled those changes by putting them behind a boolean
option.
I'll revisit them after I've cut the next release.
refs: https://github.com/wez/wezterm/issues/478
Manual test scenario:
```
wezterm -n --config adjust_window_size_when_changing_font_size=false --config 'exit_behavior="Hold"' start -- sh -c "echo '(...)'"
```
then CTRL +/- to change font size; the first cell of the `...` was
previously random garbage, now is more consistent.
refs: https://github.com/wez/wezterm/issues/478
mouse move events in the tab bar, and paint events, could cause
the title bar state to be recomputed.
Make sure that we don't trigger the status event to trigger for those.
refs: https://github.com/wez/wezterm/issues/500
I've only tested this on macos, but it should be cross platform,
with the caveat that Wayland doesn't let a window position itself,
so this won't work there.
We were using the value that was active when the window was created,
and never updating it.
This commit sweeps the interval check into the existing periodic
window maintenance routine.
refs: https://github.com/wez/wezterm/issues/500
The API isn't finalized; this is proof of concept for putting something
in the area to the right of the new tab button.
The info will be right aligned to the tab area.
```lua
local wezterm = require 'wezterm';
wezterm.on("update-right-status", function(window, pane)
-- demonstrates shelling out to get some external status.
-- wezterm will parse escape sequences output by the
-- child process and include them in the status area, too.
local success, date, stderr = wezterm.run_child_process({"date"})
-- Make it italic and underlined
window:set_right_status(wezterm.format({
{Attribute={Underline="Single"}},
{Attribute={Italic=true}},
{Text="Hello "..date},
}));
end)
return {
}
```
refs: https://github.com/wez/wezterm/issues/500
As explained in the docs included in this commit, ideally this
wouldn't be needed, but due to a long-standing hinting bug in
freetype <https://gitlab.freedesktop.org/freetype/freetype/-/issues/761>
it seems most expedient to just render our own block glyphs,
so that's what this does!
refs: #433
This commit expands on the prior commits to introduce the concept
of per-window configuration overrides.
Each TermWindow maintains json compatible object value holding
a map of config key -> config value overrides.
When the window notices that the config has changed, the config
file is loaded, the CLI overrides (if any) are applied, and then
finally the per-window overrides, before attempting to coerce
the resultant lua value into a Config object.
This mechanism has some important constraints:
* Only data can be assigned to the overrides. Closures or special
lua userdata object handles are not permitted. This is because
the lifetime of those objects is tied to the lua context in which
they were parsed, which doesn't really exist in the context of
the window.
* Only simple keys are supported for the per-window overrides.
That means that trying to override a very specific field of
a deeply structured value (eg: something like `font_rules[1].italic = false`
isn't able to be expressed in this scheme. Instead, you would
need to assign the entire `font_rules` key. I don't anticipate
this being a common desire at this time; if more advance manipulations
are required, then I have some thoughts on an event where arbitrary
lua modifications can be applied.
The implementation details are fairly straight-forward, but in testing
the two examplary use cases I noticed that some hangovers from
supporting overrides for a couple of font related options meant that the
window-specific config wasn't being honored. I've removed the code that
handled those overrides in favor of the newer more general CLI option
override support, and threaded the config through to the font code.
closes: #469closes: #329
`wezterm`, `wezterm-gui` and `wezterm-mux-server` now all support
a new `--config name=value` CLI option that can be specified
multiple times to supply config overrides.
Since there isn't a simple, direct way to update arbitrary fields
of a struct in Rust (there's no runtime reflection), we do this
work in lua.
The config file returns a config table. Before that is mapped
to the Rust Config type, we have a new phase that takes each
of the `--config` values and applies it to the config table.
For example, you can think of configuration as working like this
if wezterm is started as `wezterm --config foo="bar"`:
```lua
config = load_config_file();
config.foo = "bar";
return config;
```
The `--config name=value` option is split into `name` and `value`
parts. The name part is literally concatenated with `config` in
the generated lua code, so the name MUST be valid in that context.
The `value` portion is literally inserted verbatim as the rvalue in the
assignment. Not quoting or other processing is done, which means
that you can (and must!) use the same form that you would use in
the config file for the RHS. Strings must be quoted. This allows
you to use more complicated expressions on the right hand side,
such as:
```
wezterm --config 'font=wezterm.font("Fira Code")'
```
The overrides stick for the lifetime of the process; even if
you change the config file and reload, then the value specified
by the override will take precedence.
refs: https://github.com/wez/wezterm/issues/469
refs: https://github.com/wez/wezterm/issues/499
This is defined as a trait method on Pane (default: false), and has the
obvious transitive equivalent methods in Tab and Window (eg: if all
contained items are `can_close_without_prompting`, then that container
is also `can_close_without_prompting`).
The intent is to avoid bothering the user to confirm closing a window
when the content is not stateful and doesn't warrant it.
For example: the window that is displayed in the event of a
configuration error really shouldn't prompt to the user to confirm
closing it.
All termwiztermtab panes are `can_close_without_prompting==true`
to effect this policy.
In the future, we could teach LocalPane to lookup the session leader
process against a list of "uninteresting" or "stateless" processes
and return an appropriate result (as suggested in
https://github.com/wez/wezterm/issues/280). That functionality
is NOT part of this commit.
`exit_behavior = "Hold"` will keep the pane alive until explicitly
closed. More details in the docs that are part of this commit.
refs: https://github.com/wez/wezterm/issues/499
The Cascadia Code font has ligatures for `---` that consist of
a triple wide glyph followed by two zero-width glyphs. Rewrite
that into a single glyph that spans three cells and remove the
zero-width glyphs from the shaped info.
refs: https://github.com/wez/wezterm/issues/478
Connect the gui to the new shaping logic; this means that we
can now correctly render fg/bg color when the cursor moves
through the cells that comprise a ligature.
refs: https://github.com/wez/wezterm/issues/478
This function is intended to deal with certain kinds of ligatures
and certain combining sequences that don't have corresponding glyphs.
It isn't hooked up to the gui yet, but does have unit tests that
are probably mostly correct.
refs: https://github.com/wez/wezterm/issues/478
Refine the colorization logic to make it more of a blending operation.
Previously, we were relying on opengl to carry out blending between
layers on our behalf, but that wasn't perfect.
This commit is inspired by this post:
https://www.puredevsoftware.com/blog/2019/01/22/sub-pixel-gamma-correct-font-rendering/
and factors in the background color when computing the colorized
glyph.
This appears to reduce the dark fringes/edges that we were seeing
before, without noticeably changing the brightness of the result.
refs: #491
https://learnopengl.com/Advanced-Lighting/Gamma-Correction suggests
some good practices:
* Only enable SRGB output on the final draw call, so that all prior
stages can operate on linear values and avoid converting to/from
linear multiple times.
* The SRGBA textures automatically linearize when sampled, but:
* The RGB data must be SRGB (non-linear)
* The A channel is assumed to be linear!
This commit nudges us closer to that by:
* Converting the freetype coverage map from its linear value to
non-linear when rasterizing.
* Splitting the shader files into one per stage (background, lines,
glyphs) and only setting outputs_srgb for the glyph stage
refs: #491
This allows explicitly manipulating the hue, saturation, brightness
of the text rendered in the terminal, allowing users to dial in
the accidental effect that was introduced by
d886de8300
For example, this will punch up the brightness:
```
foreground_text_hsb = {
hue = 1.0,
saturation = 1.0,
brightness = 1.5,
},
```
refs: https://github.com/wez/wezterm/issues/491
This commit:
* Fixes up the alpha blending draw parameters as discussed in
https://github.com/glium/glium/issues/1844 and
https://github.com/PistonDevelopers/conrod/issues/1347
* Introduces `colorize` and `colorize_hsv` functions to the shader.
comments in the code explain those functions in detail.
As of this commit, `colorize_hsv` is what is used now. To my
eye on this mac, it produces blended glyphs with less noticeable
dark antialiasing fringes.
refs: #470
Is it *right*? Hard to say, but it looks better than
the behavior I see with master at the moment.
This is a partial revert of #413, but respins it to
try to get a better alpha value for glyphs.
refs: #413
refs: #470
We weren't didn't treat the "No existing hyperlink, No new hyperlink"
case as no change in hyperlink, and were invalidating the window on
every mouse except for those over text with a hyperlink.
* Add cli option --config-file
* Update cli arg doc & make it conflict with skipping config
* When the config is given explicitly (either using --config-file or via WEZTERM_CONFIG_FILE), failing to load this file will use the default config.
* Otherwise the config file is searched one by one in a few directories.
This commit implements the deprecated NSUserNotification bits needed
to be able to handle clicking on a notification and open our choice
of URL.
Ideally we'd use the newer UserNotifications framework, but that
requires code signing.
Dead key processing respects the
`send_composed_key_when_left_alt_is_pressed` and
`send_composed_key_when_right_alt_is_pressed` options.
See doc changes included in this commit for more info.
refs: https://github.com/wez/wezterm/issues/410
This commit changes mouse-based selection and middle click to use the
PrimarySelection.
CTRL-SHIFT-{C,V} use Clipboard.
{SHIFT,CTRL}-Insert use PrimarySelection.
`CompleteSelection` and `CompleteSelectionOrOpenLinkAtMouseCursor` now
require a parameter to specify the destination clipboard.
Removed the `default_clipboard_XXX` options added in
8dad34fa61 in favor of just explicitly
assigning the key/mouse bindings.
closes: #417
* Adds `CopyTo` and `PasteFrom` assignments that specify the
destination/source.
* Adds `default_clipboard_copy_destination` and `default_paste_source`
config options that specify the default destination/source for
existing `Copy` and `Paste` operations (for @bew)
* Deprecating `PastePrimarySelection` in favor of `PasteFrom`.
* Added `CTRL-Insert` -> `Copy` (for @Babar)
Aside from the new key assignment, these changes shouldn't change
the default behavior, but do make it easier to consider changing
that in a later commit.
They should allow for example:
* Set `default_clipboard_copy_destination = "PrimarySelection"` to
prevent populating the clipboard by default when using the mouse.
* Overriding the CTRL-Insert, CTRL-SHIFT-C to explicitly populate
the clipboard
* Set `default_paste_source = "PrimarySelection"` for middle click
to paste the selection.
* Overriding SHIFT-Insert, CTRL-SHIFT-V to explicitly paste from
the clipboard.
refs: #417
* Add ClearBuffer action
Clears all lines, both visible and those scrolled off the top of the viewport, making the prompt line the new first line and resetting the scrollbar thumb to the full height of the window.
This is the behavior that Hyper / xterm has for clearing the terminal.
* Combine ClearBuffer into ClearScrollback as enum with associated erase mode
Makes it easier to manage the different options of clearing the terminal.
The default is true, which means that adjusting the font size will
cause the window to resize to preserve the number of rows/cols in
the terminal.
When set to false, the window size is preserved and the number of
terminal rows/cols is adjusted instead.
refs: https://github.com/wez/wezterm/issues/431
This appears to have been broken since the introduction of mouse
assignments :-/
This commit adds Pane::is_alt_screen_active so that the gui layer
can tell whether the alt screen is active, and allow passing down
the event.
refs: #429
Since we no longer have our fallback Software renderer (only mesa),
remove what has become an empty variant and hoist the GL state up
into RenderState, holding Option<RenderState> in the window.
It's been replaced with an opaque termwiz error type instead.
This is a bit of a more conservative approach than that in (refs: #407)
and has less of an impact on the surrounding code, which appeals to
me from a maintenance perspective.
refs: #406
refs: #407
```
printf "\x1b[4m\x1b[58;2;255;0;0mred underline\x1b[0m"
```
prints "red underline" in the foreground color, with an
underline that is bright red `rgb(255, 0, 0)`.
refs: https://github.com/wez/wezterm/issues/415
These aren't currently rendered, but the parser and model now support
recognizing expanded underline sequences:
```
CSI 24 m -> No underline
CSI 4 m -> Single underline
CSI 21 m -> Double underline
CSI 60 m -> Curly underline
CSI 61 m -> Dotted underline
CSI 62 m -> Dashed underline
CSI 58 ; 2 ; R ; G ; B m -> set underline color to specified true color RGB
CSI 58 ; 5 ; I m -> set underline color to palette index I (0-255)
CSI 59 -> restore underline color to default
```
The Curly, Dotted and Dashed CSI codes are a wezterm assignment in the
SGR space. This is by no means official; I just picked some numbers
that were not used based on the xterm ctrl sequences.
The color assignment codes 58 and 59 are prior art from Kitty.
refs: https://github.com/wez/wezterm/issues/415
When running the GUI, we generate a unix domain socket path for
the current process and start up a mux server for that path.
This allows `wezterm cli list` and `wezterm cli split-pane` to
work implicitly inside the GUI session.
When started in this way, the mux server is not persistent;
when the GUI process is terminated, all of its windows, tabs
and panes are terminated.
refs: https://github.com/wez/wezterm/issues/230
This adopts a similar technique to that used to pass the wezterm
config to the term crate, but this time it is for passing it to
the window crate.
The use_ime option has been ported over to this new mechanism.
Hooks up toggling fullscreen mode on macos, with plumbing for
other systems.
I prefer not to use the "modern fullscreen" mode because I find
the transition animations in macOS are horrendously slow.
I'll make an option to allow selecting whether that is used or not
in a follow-on diff.
refs: https://github.com/wez/wezterm/issues/177
The new banner is less intrusive; it doesn't steal focus
and for users that have multiple wezterm processes, doesn't show
one per process.
So let's turn off the updater window. I'm considering moving the
"smart" upgrade links into a helper subcommand, but that's for
another diff.
This commit keeps the content from the last release check in a local
file and reads from that file on startup to set a two-line release
info banner in each new pane.
* Allow injecting some initial output to new panes
* Have the update checker set this new-pane-banner to a short
upsell to let the user know there is an update.
* Refactor toast notifications into their own crate
* Have the update checker call a new stub function that triggers
a toast notification with an URL... but it does nothing because
the rust ecosystem doesn't support this on macos yet and I'm
writing this code there
Tidies up the plumbing around pixel dimensions so that ImageData
can be rendered via the termwiztermtab bits.
I put this together to play with sticking the wezterm logo in
the close confirmation dialogs. I didn't end up using that though,
but have preserved the commented code for use in future hacking.
80214319ae broke the use of RUST_LOG to
turn up trace logging.
This commit refactors logger initialization into the env-bootstrap crate
so that it is centralized, and adopts the use of `WEZTERM_LOG` to
override the default logging filters, rather than `RUST_LOG`.
Make pane, tab, window close confirmations use the same core function.
Make that function accept mouse input so that closing the window with
a mouse click doesn't require switching to the keyboard to confirm
the close.
refs: #280
Revise logging so that we use info level for things that we want
to always log, and adjust the logger config to always log info
level messages.
That means shifting some warning level logs down lower to debug level so
that they aren't noisy.
closes: https://github.com/wez/wezterm/issues/388
The default is 1.0. `line_height` is used to scale the effective
cell height, increasing the amount of space between font baselines.
refs: https://github.com/wez/wezterm/discussions/387
https://wiki.lazarus.freepascal.org/Cocoa_DPI states that the dpi
on macOS is 72. That matches up to the experimental results reported
in #332 (in which 74.0 appears about the right size).
This commit introduces a `DEFAULT_DPI` constant that is set to 72 on
macOS and 96 on other operating systems.
The result of this is that a 10 point Menlo font now appears to be
the same size in Terminal.app and WezTerm.app.
refs: https://github.com/wez/wezterm/issues/332
This commit is a bit noisy because it also meant flipping the key map
code from using the termwiz input types to the window input types, which
I thought I'd done some time ago, but clearly didn't.
This commit allows defining key assignments in terms of the underlying
operating system raw codes, if provided by the relevant layer in the
window crate (currently, only X11/Wayland).
The raw codes are inherently OS/Machine/Hardware dependent; they are the
rawest value that we have available and there is no meaningful
understanding that we can perform in code to understand what that key
is.
One useful property of the raw code is that, because it hasn't gone
through any OS level keymapping processing, its value reflects its
physical position on the keyboard, allowing you to map keys by position
rather than by value. That's useful if you use software to implement
eg: DVORAK or COLEMAK but want your muscle memory to kick in for some of
your key bindings.
New config option:
`debug_key_events = true` will cause wezterm to log an "error" to stderr
each time you press a key and show the details in the key event:
```
2020-12-06T21:23:10.313Z ERROR wezterm_gui::gui::termwindow > key_event KeyEvent { key: Char('@'), modifiers: SHIFT | CTRL, raw_key: None, raw_modifiers: SHIFT | CTRL, raw_code: Some(11), repeat_count: 1, key_is_down: true }
```
This is useful if you want to figure out the `raw_code` for a key in your
setup.
In your config, you can use this information to setup new key bindings.
The motivating example for me is that because `raw_key` (the unmodified
equivalent of `key`) is `None`, the built-in `CTRL-SHIFT-1` key
assignment doesn't function for me on Linux, but I can now "fix" this in
my local configuration, taking care to make it linux specific:
```lua
local wezterm = require 'wezterm';
local keys = {}
if wezterm.target_triple == "x86_64-unknown-linux-gnu" then
local tab_no = 0
-- raw codes 10 through 19 correspond to the number key 1-9 positions
-- on my keyboard on my linux system. They may be different on
-- your system!
for i = 10, 20 do
table.insert(keys, {
key="raw:"..tostring(i),
mods="CTRL|SHIFT",
action=wezterm.action{ActivateTab=tab_no},
})
tab_no = tab_no + 1
end
end
return {
keys = keys,
}
```
Notice that the key assignment accepts encoding a raw key code using
a value like `key="raw:11"` to indicate that you want a `raw_code` of
`11` to match your key assignment. The `raw_modifiers` portion of
the `KeyEvent` is used together with the `raw_code` when deciding
the key assignment.
cc: @bew
164adb78e3 added blowing some
opengl related state during resize, however, on some systems
(BigSur with M1 silicon, perhaps also Intel?) and Windows 10
can generate a resize event before we've spun up opengl, so
we need to make this conditional.
refs: #359closes: #358
Previously, we'd enumerate the font dirs on every font resolve for
every bit of styled text.
This moves the new FontDatabase instances to be single instanced
in the FontConfiguration. The font-dirs will be scanned once
on a config reload, but the built-in in-memory fonts will only
every be enumerated once per FontConfiguration instance.
The recent addition of dynamic fallback resolution highlighted this
issue.
The test scenario is:
1. Output some glyphs that need dynamic fallback
2. ctrl-+ to change the font scaling
3. rasterization fails because of some bad cached state; the font_idx's
were invalidated by the scale change which reset the dynamically
discovered fallback fonts.
The resolution is to blow the glyph and shape caches when scaling
is changed.
Adds an option to control how wide glyphs (more specifically: square
aspect glyphs) are scaled to conform to their specified width.
The three options are `Never`, `Always`, and `WhenFollowedBySpace`.
When a glyph is loaded, if it is approximately square, this option is
consulted. If overflow is permitted then the glyph will be scaled
to fit only the height of the cell, rather than ensuring that it fits
in both the height and width of the cell.
refs: #342
Use the scaling factor between the font metrics for the base font
and those of the fallback font selected for a given glyph.
The scenario is this: the base font is typically the first one selected
from the font configuration. There may be multiple fallback fonts that
are different sizes; for instance, the Font Awesome font has glyphs that
are square in aspect and are thus about twice the width of a typical
textual monospace font. Similarly, Noto Color Emoji is another square
font but that has a single set of bitmap strikes at a fixed 128 px
square.
The shaper returns advance metrics in the scale of the containing font,
and the rasterizer will target the supplied size and dpi.
We need to scale these to match the base metrics.
Previously we used a crude heuristic to decide whether to scale,
and that happened to work for Noto Color Emoji but not for Font Awesome,
whose metrics were just inside the bounds of the heuristic.
This commit allows retrieving the metrics for a given font_idx so
that we can compute the correct scale factor without any heuristics,
and applies that to the rasterized glyph.
refs: https://github.com/wez/wezterm/issues/342
This is one of those massive time sinks that I almost regret...
As part of recent changes to dust-off the allsorts shaper, I noticed
that the harfbuzz shaper wasn't shaping as well as the allsorts one.
This commit:
* Adds emoji-test.txt, a text file you can `cat` to see how well
the emoji are shaped and rendered.
* Fixes (or at least, improves) the column width calculation for
combining sequences such as "deaf man" which was previously calculated
at 3 cells in width when it should have just been 2 cells wide, which
resulted in a weird "prismatic" effect during rendering where the
glyph would be rendered with an extra RHS portion of the glyph across
3 cells.
* Improved/simplified the clustering logic used to compute fallbacks.
Previously we could end up with some wonky/disjoint sequence of
undefined glyphs which wouldn't be successfully resolved from a
fallback font. We now make a better effort to consolidate runs of
undefined glyphs for fallback.
* For sequences such as "woman with veil: dark skin tone" that occupy a
single cell, the shaper may return 3 clusters with 3 glyphs in the
case that the font doesn't fully support this grapheme. At render
time we'd just take the last glyph from that sequence and render it,
resulting in eg: a female symbol in this particular case. It is
generally a bit more useful to show the first glyph in the sequence
(eg: person with veil) rather than the gender or skin tone, so the
renderer now checks for this kind of overlapping sequence and renders
only the first glyph from the sequence.