On my mac, depending the config, I noticed that modals didn't always
render immediately; force a window invalidation after assigning to
encourage them to do so.
Add the key to enter Copy Mode to the table. It may be repetitive, but it
makes the table a useful cheatsheet.
Document `y`, it was undocumented.
Use kbd tag. Capitalize all keys with modifiers for consistency. Use mixed
case names for the modifiers. Use `+` for key combinations.
In https://github.com/wez/wezterm/issues/2932 the user desired to have
brightened text without the boldness, as they were accustomed to that
behavior in a couple of other terminal emulators.
This commit changes the `bold_brightens_ansi_colors` from a simple
boolean to a tristate that allows for not changing the brightness,
changing the brightness, and changing the brightness while adjusting
the boldness down to normal levels.
boolean values are accepted for backwards compatibility.
```
thread 'main' panicked at 'Error in Surface::configure: Both `Surface` width and height must be non-zero. Wait to recreate the `Surface` until the window has non-zero area.', C:\Users\runneradmin\.cargo\registry\src\github.com-1ecc6299db9ec823\wgpu-0.14.0\src\backend\direct.rs:274:9
note: run with `RUST_BACKTRACE=1` environment variable to display a backtrace
```
refs: https://github.com/wez/wezterm/issues/2881
We have to manually connect for this to work well across both
underlying libraries. libssh in particular doesn't support it
at all.
refs: https://github.com/wez/wezterm/issues/2893
This commit introduces a rough first pass at a command palette modal.
It is an adaptation of the emoji character selector and needs
refinement.
Importantly, the default pane selector key assignment now calls
into this new command palette instead.
refs: https://github.com/wez/wezterm/issues/1485
This took a decent amount of effort to thread through with context;
wrappers around NSMenu and NSMenuItem are added to reduce some of
the objc usability warts, and an additional NSObject wrapper is
added to help copy the KeyAssignment from the existing list
of command palette commands and associate it with the menu item.
When a menu item is selected, macOS will walk through the responder
chain and look for a responder that responds to the selector associated
with the menu item. In practice that means that our window/view class
will be tried first, and then later, our app delegate will be tried.
This commit implements routing from both of these: the window case
routes to the associated TermWindow and drops into the existing
perform_key_assignment method.
In case there is no window (not currently possible, but will be
in the future), the app delegate also has a placeholder for dispatching
key assignments, although it will only be able to perform a subset
of the possible actions.
A couple of things to note:
* Items aren't smart enough to disable themselves or adjust their
caption based on the context. To make that work, we either need
to recreate the entire menubar when any possible context changes
(doable, but feels heavy), or we need to assign a target to each
menu item and implement a validation handler on that target.
That seemed to mess with the responder chain when I briefly
experimented with it.
* There's some disabled code to add a Services menu. It is disabled
because when it is enabled, accessing either Services or Help
from the menu bar sends the process into a busy loop somewhere
in macOS's internals. It's unclear what it is unhappy with.
* No keyboard accelerators are associated with the menubar yet.
That needs some thought, as they would essentially become global
keyboard shortcuts and take precedence over the shortcuts defined
for other keys in the config. This feels like it should be something
that the user has control over, so there needs to be something to
allow that before we go ahead and wire those up.
refs: https://github.com/wez/wezterm/issues/162
refs: https://github.com/wez/wezterm/issues/1485
Implement an app delegate to receive a callback when the system
requests that we open `.command` files, and then ask the mux
layer to spawn a window for it and execute it via the shell.
Also allow handling `.sh`, `.zsh`, `.bash`, `.fish` and `.tool`,
per kitty.
refs: https://github.com/wez/wezterm/issues/2741
refs: https://github.com/wez/wezterm/issues/2871
* Update macos docs with wezterm CLI installation
wezterm binary is not by default available in shells like the default zsh or bash, on macos we need to explicitly add the path to the wezterm binaries inside the WezTerm.app
* Update docs/install/macos.markdown
Co-authored-by: Wez Furlong <wez@wezfurlong.org>
When using `key_map_preference="Mapped"`, `ctrl-shift-1` is actually
`ctrl-shift-!` in a US layout.
This commit adds the us-layout mapping for shifted number keys to
allow that to work, but it is worth calling out that this will only
be meaningful in layouts that have the same US mapping for the number
keys.
refs: https://github.com/wez/wezterm/issues/2623
This sequence forms a grapheme with cell_width=2, but harfbuzz returns
it as two distinct clusters, causing our prior logic to shape them
independently from different fonts, but our logic for assessing width
would resolve them both to the same cell and double-count their width,
leading to issues with the rendered result.
This commit revises our clustering logic to add a pass that compares
the harfbuzz cluster positions with the cell-based positions from
the presentation_width that may have been provided. We use the starting
cell positions from that to order and de-dup so that clusters aren't
split in the wrong place.
refs: https://github.com/wez/wezterm/issues/2572
We weren't including the invisible space cells into the model
as part of building up the logical line, resulting in the logical
line being shorter than it should have been.
That resulted in some of the components of the double wide cells
not being rendered in the correct place.
refs: https://github.com/wez/wezterm/issues/2571
refs: https://github.com/wez/wezterm/issues/2568
We weren't matching the domain id when resolving the remote->local pane
mapping, which meant that having 2 or more mux client domains active
would lead to associating eg: remote pane id 1 with whichever local
pane was associated with any remote pane id 1 *first*.
This commit requires that both the domain id and the remote pane id
match.
refs: https://github.com/wez/wezterm/issues/2616
When closing the all mux tabs in a window, the remote will close
the window. If the local has a mixture of local and remote tabs
then subsequent attempts to spawn a tab in that window would
fail due to reusing the stale remote window id.
This commit purges the local/remote mappings that are (probably)
dead when the remote indicates that a pane has been removed.
The mapping should be re-established as needed later on.
refs: https://github.com/wez/wezterm/issues/2614
`iter_panes` returns the renderable set of panes, but most functions
in the mux want to operate on the full set of panes.
Notably, when closing a tab, we were not killing panes other than
the zoomed pane, which caused wezterm to linger in the background.
refs: https://github.com/wez/wezterm/issues/2548
I'd like to push that into the status bar, so nudge people towards
that in the docs for this.
There is a config option to restore it. I'd like to ultimately
remove that though.
refs: https://github.com/wez/wezterm/discussions/2542
https://github.com/wez/wezterm/pull/2435 proposed including
CTRL-modified keys, but I think that the state of the code now means
that we can simplify that area and adjust it so that we will default to
routing keys to the IME, but excluding them based on the
`send_composed_key_when_(left|right)_alt_is_pressed` configuration.
I've only very lightly tested this, but it seems ok with roman text and
me punching in random pinyin and then using CTRL-H or CTRL-M to delete
or enter.
refs: https://github.com/wez/wezterm/pull/2435
I've expanded the number of bits from 16->32 without impacting
the overall struct sizes and reserved 2 bits for super/subscript.
I refer to these as vertical alignment properties for conceptual
consistency with css.
SGR 73, 74, 75 are used to set super, sub and normal vertical alignment.
These are compatible with mintty.
However, mintty just added support for setting both attributes to render in
small caps in 06ac446049
(https://github.com/mintty/mintty/issues/1171)
I was going to upgrade to the unicode 15 font, but in testing this I
decided that the logic is slightly complex and the glyphs are often
difficult to see at most terminal font sizes, which generates questions
from users, so just fall back to notdef.
This is a weird attribute TBH.
xterm seems to replace the cells with spaces: copying and pasting
results in spaces.
Kitty ignores it.
VTE doesn't render it but allows copying and pasting.
The latter is now also the behavior in wezterm.
This provides a means for more easily extending the default key
tables without forcing the user to recreate the entire config
for themselves.
wezterm.gui.default_keys is also added by this, but it is likely
not as useful.
There were two problems:
* We weren't correctly invalidating when the hover state changed
(a recent regression caused by recent caching changes)
* We'd underline every link with the same destination on hover,
not just the one under the mouse (longstanding wart)
Recent changes allow the application layer to reference the underlying
Lines directly, so we can restore the original and expected
only-highlight-under-the-mouse by switching to those newer APIs.
Adjust the cache values so that we know to also verify the current
highlight and invalidate.
I was a little surprised to see that this also works with mux client
panes: I was expecting to need to do some follow up on those because
they return copies of Line rather than references to them. That happens
to work because the mux client updates the hyperlinks at the time where
it inserts into its cache. The effect of that is that lines in mux
client panes won't update to new hyperlink rules if they were received
prior to a change in the config.
refs: https://github.com/wez/wezterm/issues/2496
Given this sequence:
ENABLE-UNDERLINE CRLF SGR-RESET
if the CRLF caused the terminal to scroll, the newly created line
at the bottom would be filled in with a "blank" cell that had
the underline attribute set.
That's because we're supposed to preserve the coloring in that
scenario, but we were also preserving other SGR attributes.
This commit explicitly clears out under, over and strikethrough
lines from these blank attributes.
refs: https://github.com/wez/wezterm/issues/2489
We were getting data like this back from harfbuzz:
shaped font_idx=0 "파인더에서 만든 폴더" as: [.notdef=0+448|.notdef=0+448|.notdef=6+448|.notde=6+448|.notdef=6+448|.notdef=15+448|.notdef=15+448|.notdef=21+448|.notdef=21+448|.notdef=27+448|.notdef=27+448|space=33+448|.notdef=34+448|.notdef=34+448|.notdef=34+448|.notdef=43+448|.notdef=43+448|.notdef=43+448|space=52+448|.notdef=53+448|.notdef=53+448|.notdef=53+448|.notdef=62+448|.notdef=62+448]
which had a series of discontiguous and repeated runs for the same
cluster/region, but due to a logic error, we weren't coalescing them
together and were passing somewhat nonsensical ranges to the
next font for shaping.
This commit "simply" ensures that we code the checks for codepoint==0
(the `.nodef` seen above) and the results are at least correct
for this particular case.
refs: https://github.com/wez/wezterm/issues/2482
ad9490ee8f unset SHELL from the
environment on startup which had the consequence of causing
`os.getenv("SHELL")` to return `nil` when used in the config file.
Rather than simply restoring SHELL env var, recognize that reading
the environment from a long lived process is prone to seeing
stable environment forever.
We already compensate for this in the pty crate's understanding
of the base environment, so this commit patches `os.getenv`
and replaces it with our own imlementation that uses that same
logic.
The base environment logic has been extended to set SHELL from
the passwd database to round things out.
refs: https://github.com/wez/wezterm/discussions/2481
There are caveats to determining this, but when we think
password entry is enabled, switch the cursor to the font-awesome
lock glyph instead of the normal cursor sprite.
fa_lock is used because it is monochrome and can thus be tinted
to the configured cursor color, and it respects blinking/easing.
refs: https://github.com/wez/wezterm/issues/2460
I've had a couple of people report issues like
https://github.com/wez/wezterm/issues/2378 recently, and we can avoid
this class of problem by unsetting SHELL at proces startup, so that's
what we do.
CTRL-SHIFT-U is a new default key assignment for this new modal.
It opens up a fuzzy searchable browser that defaults to showing
emoji/emoticons. The category can by cycled through the suggested
emoji categories using CTRL-r. Unlike the system emoji palette,
wezterm includes a category for nerdfont symbols, and another
that is a list of all unicode codepoint names, so you should be
able to browse for pretty much any codepoint you can think of.
The modal also allows fuzzy searching based on:
* The official unicode name
* The github shortcode
* codepoint value in hex
so if you know the codepoint value but not the name, you can
still find a way to input what you're looking for.
Pressing Enter will copy the selected item to the clipboard
send it to the active pane, and cancel the modal. You can therefore
repeat the insert by simply pasting.
I plan to add frecency to this in a later commit: that way the
frequently/recently used selections will show in a category of
their own and make it easier to re-input them.
refs: https://github.com/wez/wezterm/issues/2163
Inspecting the wezterm process with `lsof -p`, before and after closing
a pane with `CloseCurrentPane`, the same number of unix domain sockets
are open, which is bad.
This commit tries a bit harder to clean things up: if we got a process
exit condition we now remember that we had it, and, while processing
the IO for that channel, if we have no data for stdout or stderr
(respectively) and the channel exited, we close our end of the
socketpair to encourage EOF to be detected on the other end.
This is sufficient to restore the number of open files to the same
number wezterm had opened prior to opening that pane.
@chipsenkbeil: this might possibly be a factor in the issue you
reported, but I haven't had time to really dig into that yet!
refs: https://github.com/wez/wezterm/issues/2466
refs: https://github.com/wez/wezterm/issues/2456
It can have some surprising effects, so leave it at the basic logical
composition of cwd + relative rather than physical.
refs: https://github.com/wez/wezterm/issues/2449
It's not the first time that I've solved a problem by slowing things
down... in this situation, a couple of very inefficient TUI programs had
flickering outputs in wezterm because they were filling a buffer with a
bunch of spaces to erase a screen before sending the main body of their
updates in a subsequent buffer chunk. wezterm would render the
intervening partially blank frame and appear to flicker.
The resolution is to add a small delay (3ms by default) before sending
data to the terminal model. If the output is readable in that time
we'll accumulate it with the pending set of actions so that the
whole batch can be applied "more atomically".
Take care: `time cat bigfile` is sensitive to this, so we want to
keep the latency as small as possible, and we also want to avoid
accumulating actions and only flushing them at the end of the file.
We use the existing buffer size (~1MB) as a threshold: we bump
a count of the number of input bytes that resulted in the current
set of actions, and if that exceeds that buffer size we flush it.
refs: https://github.com/wez/wezterm/issues/2443
The prior mutually exclusive behavior kept surprising people so let's
just flip this around.
This is potentially a "breaking" change for folks, but I think it is
worth it.
`wezterm start -- /etc/profile` would crash on macOS because
`/etc/profile` isn't executable.
This commit checks for executable access as a prereq for both the
path search and the absolute path cases and generates a non-crashing
error:
```
$ wezterm start -- /etc/profile
17:24:03.574 ERROR wezterm_gui > Unable to spawn /etc/profile because it doesn't exist on the filesystem or is not executable (EACCES: Permission denied); terminating
```
I think I may have inadvertently changed whether the arch portion
was included in the filename for stable releases.
Allow for that in the regex.
Remove debian 9 which is no longer supported.
closes: https://github.com/wez/wezterm/issues/2382
Previously, we'd unconditionally enable dual source blending for the
text foreground layer when rendering. That meant that if the user had
configured the fg color to include an alpha value it would get "stamped
through" the draw all the way to the background, making that whole pixel
take on that alpha value rather than allowing it to blend through the
way you might expect.
In prior releases that didn't matter, but since we now allow configuring
the fg color with alpha, and allow using escape sequences to set the fg
for a span to something with alpha, there is now a much higher chance of
something looking weird.
Dual source blending is only really needed for subpixel-aa and that
isn't enabled by default.
This commit changes the behavior to use regular alpha blending if the
main config (rather than a per-font override) hasn't set the freetype
load/render target to one that enables subpixel-aa.
That means that alpha channel values work as expected for fg color
by default.
If you want to enable subpixel-aa you need to enable it globally
and be aware that it will cause weirdness when trying to use alpha
channels for the fg text color.
The docs now also indicate this behavior.
This limitation could be removed by making text rendering significantly
more complex and I don't fancy doing that at this time.
Consolidate the attributes together rather than having them in separate
versioned sections so that it is a bit more readable.
Make a note about how attributes select from existing fonts rather than
apply styling effects to fonts.
refs: https://github.com/wez/wezterm/issues/2348
They prevented using other types of mouse events!
We don't have a good way to specify that kind of alias, so for now,
take it out and replace the examples in the docs with the more verbose
equivalents.
refs: #2173
refs: #2296
Adjusts how mouse events are matched so that we can now indicate whether
mouse reporting and alt-screen should be considered as part of the event
trigger criteria.
refs: #2173
refs: #581
There was a race condition where we could leave the tab
active index pointing to the wrong pane.
That meant that the tab information computed by the gui
layer would see no panes marked as active, and thus would
end up with no active tab.
This commit fixes that by clamping the active index to
the number of panes.
refs: https://github.com/wez/wezterm/issues/2304
