This (mostly) allows the CSD added in
https://github.com/zed-industries/zed/pull/11525 to work in X11. It's
still a bit buggy as it detects a second window drag right after the
first one finishes, but it's probably better to change the way window
drags are detected in the title bar itself (as that causes other
issues).
The CSD can be tested by changing the return value of
`should_render_window_controls` to true.
Also fixes F11 crashing.
Release Notes:
- N/A
Upper before this PR, lower after.
This PR manually applies a MSAA to the font atlas. Before this PR, the
font may seem aliased ( espeacially on low DPI monitors ), that's
because `DirectWrite` and `CoreText` ( on which currently `Zed` built
the whole text system ) uses different anti-aliasing strategy. The
different anti-aliasing approach used by `DirectWrite` and `CoreText`:
The upper is `VSCode` font rendering result, middle `macOS`, lower this
PR ( pic captured with same font face, same font size, same DPI, same
physical resolution, same editor theme, and same magnification rate ).
This PR brings a quality similiar to `CoreText`. What's more, from the
`VSCode` image, you can see how `DirectWrite` sub-pixel anti-aliasing is
performed on the edge of the glyph. Can we achieve the same rendering
quality? Currently, No. `Zed` use a grayscale image to render glyph, and
a sub-pixel anti-aliasing `DirectWrite` requires all RGB channels and
the foreground color of the rendering glyph, which `Zed` dose not
provide.
So, to achieve the quality of `VSCode` font rendering, the text system
of `Zed` needs much much more efforts to refactor the codes.
Release Notes:
- N/A
This pull request replaces the static `⋯` character we used to insert
when folding a range with a custom render function that return an
`AnyElement`. We plan to use this in the assistant, but for now this
should be behavior-preserving.
Release Notes:
- N/A
---------
Co-authored-by: Nathan <nathan@zed.dev>
Co-authored-by: Conrad <conrad@zed.dev>
Restructure prompts & the prompt library.
- Prompts are now written in markdown
- The prompt manager has a picker and editable prompts
- Saving isn't wired up yet
- This also removes the "Insert active prompt" button as this concept doesn't exist anymore, and will be replaced with slash commands.
I didn't staff flag this, but if you do play around with it expect it to still be pretty rough.
Release Notes:
- N/A
---------
Co-authored-by: Nathan Sobo <1789+nathansobo@users.noreply.github.com>
Co-authored-by: Antonio Scandurra <me@as-cii.com>
Tasks
* [x] remove old flaps and output when editing a slash command
* [x] the completing a command name that takes args, insert a space to
prepare for typing an arg
* [x] always trigger completions when typing in a slash command
* [x] don't show line numbers
* [x] implement `prompt` command
* [x] `current-file` command
* [x] state gets corrupted on `duplicate line up` on a slash command
* [x] exclude slash command source from completion request
Next steps:
* show output token count in flap trailer
* add `/project` command that matches project ambient context
* delete ambient context
Release Notes:
- N/A
---------
Co-authored-by: Marshall <marshall@zed.dev>
Co-authored-by: Antonio Scandurra <me@as-cii.com>
I don't know whether there are any hard UI guidelines that dictate
whether this should be allowed or not, but I think it's very handy and
missed it.
I also think it makes sense to have this in a directory-centric editor
in which opening a directory creates a new window.
Release Notes:
- Added ability to create directory in open-file dialog on macOS.
This pull request introduces the ability to add flaps, custom foldable
regions whose first foldable line can be associated with:
- A toggle in the gutter
- A trailer showed at the end of the line, before the inline blame
information
https://github.com/zed-industries/zed/assets/482957/c53a9148-f31a-4743-af64-18afa73c404c
To achieve this, we changed `FoldMap::fold` to accept a piece of text to
display when the range is folded. We use this capability in flaps to
avoid displaying the ellipsis character.
We want to use this new API in the assistant to fold context while still
giving visual cues as to what that context is.
Release Notes:
- N/A
---------
Co-authored-by: Nathan Sobo <nathan@zed.dev>
Co-authored-by: Mikayla <mikayla@zed.dev>
Co-authored-by: Max <max@zed.dev>
Fixes: #11651
Co-Authored-By: versecafe <147033096+versecafe@users.noreply.github.com>
Release Notes:
- Added a "New Window" item to the dock menu
([#11651](https://github.com/zed-industries/zed/issues/11651)).
---------
Co-authored-by: versecafe <147033096+versecafe@users.noreply.github.com>
If opening a url opens the first browser window the call does not return
completely blocking the ui until the browser window is closed. Using
spawn instead of status does not block, but we will loose the exitstatus
of the browser window.
Release Notes:
- N/A
This pull request adds XIM (X Input Method) support to x11 platform.
The implementation utilizes [xim-rs](https://crates.io/crates/xim), a
XIM library written entirely in Rust, to provide asynchronous XIM
communication.
Preedit and candidate positioning are fully supported in the editor
interface, yet notably absent in the terminal environment.
This work is sponsored by [Rainlab Inc.](https://rainlab.co.jp/en/)
Release Notes:
- N/A
---------
Signed-off-by: npmania <np@mkv.li>
Now (on `macOS` and `Windows`) we can set font feature value:
```rust
"buffer_font_features": {
"cv01": true,
"cv03": 3,
"cv09": 1,
"VSAH": 7,
"VSAJ": 8
}
```
And one can still use `"cv01": true`.
https://github.com/zed-industries/zed/assets/14981363/3e3fcf4f-abdb-4d9e-a0a6-71dc24a515c2
Release Notes:
- Added font feature values, now you can set font features like `"cv01":
7`.
---------
Co-authored-by: Mikayla <mikayla@zed.dev>
Release Notes:
- N/A
Fixes#9207
Known Issues:
- [ ] ~~After launching Zed and immediately trying to change input
method, the input panel will appear at Point{0, 0}~~
- [ ] ~~`ime_handle_preedit` should not trigger `write_to_primary`~~
Move to other PR
- [ ] ~~Cursor is visually stuck at the end.~~ Move to other PR
Currently tested with KDE & fcitx5.
This PR adds a new `WithRemSize` element to the `ui` crate.
This element can be used to create an element tree that has a different
rem size than the base window.
`WithRemSize` can be nested, allowing for subtrees that have a different
rem size than their parent and their children.
<img width="912" alt="Screenshot 2024-05-16 at 2 25 28 PM"
src="https://github.com/zed-industries/zed/assets/1486634/f599cd9f-c101-496b-93e8-06e570fbf74f">
Release Notes:
- N/A
This PR adds some ergonomic improvements when working with GPUI
`Global`s.
Two new traits have been added—`ReadGlobal` and `UpdateGlobal`—that
provide associated functions on any type that implements `Global` for
accessing and updating the global without needing to call the methods on
the `cx` directly (which generally involves qualifying the type).
I looked into adding `ObserveGlobal` as well, but this seems a bit
trickier to implement as the signatures of `cx.observe_global` vary
slightly between the different contexts.
Release Notes:
- N/A
Adding `proxy` keyword to configure proxy while using zed. After setting
the proxy, restart Zed to acctually use the proxy.
Example setting:
```rust
"proxy" = "socks5://localhost:10808"
"proxy" = "http://127.0.0.1:10809"
```
Closes#9424, closes#9422, closes#8650, closes#5032, closes#6701,
closes#11890
Release Notes:
- Added settings to configure proxy in Zed
---------
Co-authored-by: Jason Lee <huacnlee@gmail.com>
Currently , on Windows 10, we used a `Timer` to trigger the vsync event,
but the `Timer`'s time precision is only about 15ms, which means a
maximum of 60FPS. This PR introduces a new function to allow for higher
frame rates on Windows 10.
And after reading the codes, I found that zed triggers a draw after
handling mouse or keyboard events, so we don't need to call draw again
when we handle `WM_*` messages. Therefore, I removed the
`invalidate_client_area` function.
Release Notes:
- N/A
This PR brings support for all `OpenType` font features to
`macOS(v10.10+)`. Now, both `Windows`(with #10756 ) and `macOS` support
all font features.
Due to my limited familiarity with the APIs on macOS, I believe I have
made sure to call `CFRelease` on all variables where it should be
called.
Close#11486 , and I think the official website's
[documentation](https://zed.dev/docs/configuring-zed) can be updated
after merging this PR.
> Zed supports a subset of OpenType features that can be enabled or
disabled for a given buffer or terminal font. The following OpenType
features can be enabled or disabled too: calt, case, cpsp, frac, liga,
onum, ordn, pnum, ss01, ss02, ss03, ss04, ss05, ss06, ss07, ss08, ss09,
ss10, ss11, ss12, ss13, ss14, ss15, ss16, ss17, ss18, ss19, ss20, subs,
sups, swsh, titl, tnum, zero.
https://github.com/zed-industries/zed/assets/14981363/44e503f9-1496-4746-bc7d-20878c6f8a93
Release Notes:
- Added support for **all** `OpenType` font features to macOS.
Previously, we had an instance buffer pool that could only allocate
buffers with a fixed size (hardcoded to 2mb). This caused certain scenes
to render partially, e.g. when showing tens of thousands of glyphs on a
big screen.
With this commit, when `MetalRenderer` detects that a scene would be too
large to render using the current instance buffer size, it will:
- Clear the existing instance buffers
- Allocate new instance buffers that are twice as large
- Retry rendering the scene that failed with the newly-allocated buffers
during the same frame.
This fixes#11615.
Release Notes:
- Fixed rendering issues that could arise when having large amounts of
text displayed on a large display. Fixed by dynamically increasing the
size of the buffers used on the GPU.
([#11615](https://github.com/zed-industries/zed/issues/11615)).
Before:
https://github.com/zed-industries/zed/assets/1185253/464463be-b61c-4149-a417-01701699decb
After:
https://github.com/zed-industries/zed/assets/1185253/4feacf5a-d862-4a6b-90b8-317ac74e9851
Co-authored-by: Antonio <me@as-cii.com>
Fixes: #11715
(also apply alpha of the color to wavy ones while we're at it)
Release Notes:
- Fixed display of straight underlines when using the blade renderer
(#11715)
If you go to the file tree and press "x" (which is
"project_panel::RevealInFinder"). It will open the default file
manager(in my case nautilus). But on Linux it makes Zed unresponsive.
This fixes that.
Release Notes:
- Fixed Zed blocked after opening file manager in the file tree on
Linux.
Zed can detect changes in monitor connections and disconnections and
provide corresponding feedback. For example, if the current window's
display monitor is disconnected, the window will be moved to the primary
monitor. And now Zed always opens on the monitor specified in
`WindowParams`.
Release Notes:
- N/A
<img width="1637" alt="image"
src="https://github.com/zed-industries/zed/assets/482957/5aaec657-3499-42c9-9528-c83728f2a7a1">
Release Notes:
- Added a new ambient context feature that allows showing the model up
to three buffers (along with their diagnostics) that the user interacted
with recently.
---------
Co-authored-by: Nathan Sobo <nathan@zed.dev>
The previous implementation relied on a background thread to wake up the
main thread,
which was prone to priority inversion under heavy load.
In a synthetic test, where we spawn 200 git processes while doing a 5ms
timeout, the old version blocked for 5-80ms, the new version blocks for
5.1-5.4ms.
Release Notes:
- Improved responsiveness of the main thread under high system load
While these would match how macOS handles this scenario, they crash on
Catalina, and require mouse clicks to interact.
cc @bennetbo
Release Notes:
- N/A
This PR leverages a more modern Windows API to implement
`WindowsDispatcher`, aligning its implementation more closely with that
of the `macOS` platform. The following improvements have been made:
1. Similar to `macOS`, there is no longer a need to use `sender` and
`receiver` to dispatch a `Runnable` on the main thread.
2. There is also no longer a need to use an `Event` for synchronization.
3. Consistent with #7506 and #11269, `Runnable` is now executed with
high priority.
However, this PR raises the minimum Windows version requirement of
`GPUI` to Windows 10, specifically Windows 10 Fall Creators Update
(10.0.16299). However, the `alacritty_terminal` dependency in Zed relies
on `conPTY` on Windows, an API introduced in the Windows 10 Fall
Creators Update. Therefore, the impact of this PR on Zed should be
minimal. I'd like to hear your voices about this PR, especially about
the minimum Windows version bumping.
Release Notes:
- N/A
A minor thing I've spotted and decided to fix on the spot.
It was being cloned twice within the body of that function (one of which
was redundant even without this PR); now in most cases we go down from 2
clones to 0.
Release Notes:
- N/A
This pull request introduces a new `markdown` crate which is capable of
parsing and rendering a Markdown source. One of the key additions is
that it enables text selection within a `Markdown` view. Eventually,
this will replace `RichText` but for now the goal is to use it in the
assistant revamped assistant in the spirit of making progress.
<img width="711" alt="image"
src="https://github.com/zed-industries/zed/assets/482957/b56c777b-e57c-42f9-95c1-3ada22f63a69">
Note that this pull request doesn't yet use the new markdown renderer in
`assistant2`. This is because we need to modify the assistant before
slotting in the new renderer and I wanted to merge this independently of
those changes.
Release Notes:
- N/A
---------
Co-authored-by: Nathan Sobo <nathan@zed.dev>
Co-authored-by: Conrad <conrad@zed.dev>
Co-authored-by: Alp <akeles@umd.edu>
Co-authored-by: Zachiah Sawyer <zachiah@proton.me>
It seems that on the first frame after the system resumes from sleep,
`dcomp_vsync_fn` mistakenly detects the `timer_stop_event` triggering
and exits the loop.
Release Notes:
- N/A
Release Notes:
- N/A
## What
Addresses a long-standing issue of doing the blending operations in sRGB
space. Currently, the input HSL colors are provided in sRGB space and
converted to linear in the vertex shader. Conversion back to sRGB, which
is required on most platforms today, happens at the very end of the
pipeline when writing into sRGB render target.
Note-1: in the future we may consider doing HSL -> sRGB -> Linear
transform on CPU before feeding into shaders. However, I don't expect
any significant difference here given that we are likely bound by fill
rate and pixel shaders, anyway.
Note-2: the graphics stack is programmed to detect if the platform
supports presenting in linear color space and avoids converting to sRGB
at the end in this case. However, on my Z13 laptop this isn't supported
by the RADV driver.
Closes#7684Closes#11462
@jansol please confirm if you can!
## Comparison
Screenshot of the Glazier theme before the change:
Same theme after the change:
Previously, `DirectWrite` had been following the text system
implementation on `macOS`, using the font's postscript name to
differentiate between different font faces. However, I noticed
occasional rendering issues, such as fonts incorrectly rendering as
italics. Later, I discovered that on `Windows`, the postscript name is
**not** unique. Surprisingly, even the same font can have different
postscript names on macOS and Windows! It's hard to believe! The
postscript name of a font face should be obtained from the same font
table. Why would the same font face have different names?
For example, the postscript name of ZedMono on `macOS` is
`Zed-Mono-Bold-Extended-Italic`, while on `Windows`, it is
`Zed-Mono-Extended`, missing weight and style information, leading to
incorrect rendering.
This PR introduces a `FontIdentifier` struct to uniquely identify font
faces.
Release Notes:
- N/A
As per Microsoft documentation, positive values scroll right, not left.
GPUI was incorrectly assuming it perfectly mirrored vertical scrolling.
Fixes#11515
Release Notes:
- N/A
This fixes restart after updates not working on Linux.
On Linux we can't reliably get the binary path after an update, because
the original binary was deleted and the path will contain ` (deleted)`.
See: https://github.com/rust-lang/rust/issues/69343
We *could* strip ` (deleted)` off, but that feels nasty. So instead we
save the original binary path, before we do the installation, then
restart.
Later on, we can also change this to be a _new_ binary path returned by
the installers, which we then have to start.
Release Notes:
- N/A
Now, regardless of how the Zed window is closed, Zed can remember the
window's restore size.
- [x] Windows implementation
- [x] macOS implementation
- [x] Linux implementation (partial)
- [x] update SQL data base (mark column `fullscreen` as deprecated)
The current implementation on Linux is basic, and I'm not sure if it's
correct.
The variable `fullscreen` in SQL can be removed, but I'm unsure how to
do it.
edit: mark `fullscreen` as deprecated
### Case 1
When the window is closed as maximized, reopening it will open in the
maximized state, and returning from maximized state will restore the
position and size it had when it was maximized.
https://github.com/zed-industries/zed/assets/14981363/7207752e-878a-4d43-93a7-41ad1fdb3a06
### Case 2
When the window is closed as fullscreen, reopening it will open in
fullscreen mode, and toggling fullscreen will restore the position and
size it had when it entered fullscreen (note that the fullscreen
application was not recorded in the video, showing a black screen, but
it had actually entered fullscreen mode).
https://github.com/zed-industries/zed/assets/14981363/ea5aa70d-b296-462a-afb3-4c3372883ea3
### What's more
- As English is not my native language, some variable and struct names
may need to be modified to match their actual meaning.
- I am not familiar with the APIs related to macOS and Linux, so
implementation for these two platforms has not been done for now.
- Any suggestions and ideas are welcome.
Release Notes:
- N/A
This aligns the Windows platform implementation with a code style
similar to macOS platform, eliminating most of the `Cell`s and
`Mutex`es. This adjustment facilitates potential future porting to a
multi-threaded implementation if required.
Overall, this PR made the following changes: it segregated all member
variables in `WindowsPlatform` and `WindowsWindow`, grouping together
variables that remain constant throughout the entire app lifecycle,
while placing variables that may change during app runtime into
`RefCell`.
Edit:
During the code refactoring process, a bug was also fixed.
**Before**:
Close window when file has changed, nothing happen:
https://github.com/zed-industries/zed/assets/14981363/0bcda7c1-808c-4b36-8953-a3a3365a314e
**After**:
Now `should_close` callback is properly handled
https://github.com/zed-industries/zed/assets/14981363/c8887b72-9a0b-42ad-b9ab-7d0775d843f5
Release Notes:
- N/A
This implements `app_version` on Linux by using an optional,
compile-time `RELEASE_VERSION` env var that can be set.
We settled on the `RELEASE_VERSION` as the name, since it's similar to
`RELEASE_CHANNEL` which we use in Zed.
cc @ConradIrwin @mikayla-maki
Release Notes:
- N/A
Co-authored-by: Bennet <bennetbo@gmx.de>
This fixes a race-condition that showed up when trying to restart
Nightly/Preview/...
When running with these release channels, Zed tries to ensure that
there's only one instance of Zed running.
It does that by listening on a TCP socket to which other instances can
connect on start. If the other instance receives a message, it knows
that another Zed instance is running and exits.
On Linux, though, we ran into a race condition:
1. `kill -0`, which checks whether a process is still running, returns
an error, signalling that the old Zed process has exited
2. BUT: the process was still listening on the TCP port.
It seems like that on Linux, process resources aren't guaranteed to be
cleaned up as soon as signal handling stops working for a process.
The fix is to wait until the process is no longer listening on any TCP
sockets.
There's a slight downside to this: GPUI processes that never listen on
any TCP sockets now have to pay the cost of an additional `lsof` call
when restarting. We do think that it's a reasonable tradeoff for now
though, since the other options (extending the platform interface to
provide callbacks, sharing the listening port in the framework, ...)
seem wider-reaching only to fix a very local bug.
Release Notes:
- N/A
Co-authored-by: Bennet <bennetbo@gmx.de>
Fixed various small issues on Linux, mainly on Wayland.
Apart from the first commit (which should be self-describing), the other
commits have a description explaining the issue and what they do.
caadc58bea should fix
https://github.com/zed-industries/zed/issues/11037
Release Notes:
- N/A
This PR replaces all pointer events on X11 with their XI2 equivalents,
which fixes problems with scroll events not being reported when a mouse
button is down. Additionally it closes#11206 by resetting the tracked
global scroll valulator position with `None` on a leave event to prevent
a large scroll delta if scrolling is done outside the window. Lastly, it
resolves the bad window issue kvark was having.
Release Notes:
- Fixed X11 Scroll snapping (#11206 ).
---------
Co-authored-by: Mikayla Maki <mikayla@zed.dev>
Release Notes:
- N/A
This changes the first click detection in Wayland by requiring first
click after the keyboard loses focus, and after a `wl_pointer` enters a
window that has keyboard focus
This PR makes the `border` methods require an explicit width instead of
defaulting to 1px.
This breaks convention with Tailwind, but it makes GPUI more consistent
with itself. We already have an edge case where the parameterized method
had to be named `border_width`, since `border` was taken up by an alias
for the 1px variant.
### Before
```rs
div()
.border()
.border_t()
.border_r()
.border_b()
.border_l()
.border_width(px(7.))
```
### After
```rs
div()
.border_1()
.border_t_1()
.border_r_1()
.border_b_1()
.border_l_1()
.border(px(7.))
```
Release Notes:
- N/A
Notable things I've had to fix due to 1.78:
- Better detection of unused items
- New clippy lint (`assigning_clones`) that points out places where assignment operations with clone rhs could be replaced with more performant `clone_into`
Release Notes:
- N/A
Since Wayland doesn't have a way for windows to activate themselves,
currently, when you click on a link in Zed, the browser window opens in
the background.
This PR implements the `xdg-activation` protocol to get an activation
token, which the browser can use to raise its window.
https://github.com/zed-industries/zed/assets/71973804/8b3456c0-89f8-4201-b1cb-633a149796b7
Release Notes:
- N/A
Release Notes:
- N/A
While developing [Loungy](https://loungy.app), I noticed that everytime
I wake my laptop, Loungy starts consuming 100% CPU. I traced it down to
`start_display_link` as there was this error message at the time of wake
up:
```
[2024-05-02T05:02:31Z ERROR util] /Users/matthias/zed/crates/gpui/src/platform/mac/window.rs:420: could not create display link, code: -6661
```
The timeline is this:
1. The application is hidden with `cx.hide()`
2. The system is put to sleep and later woken up
3. `window_did_change_screen` would trigger immediately after wakeup,
calling `start_display_link`
4. `start_display_link` fails catastrophically as `DisplayLink::new`
starts hogging all the CPU for some reason?
5. throws the error message above
6. Once the window is opened, `window_did_change_occlusion_state` it
retriggers `start_display_link` and the CPU issue subsides
One contributor to some beach-balls was that the main thread was calling
block_with_timeout, but the timeout never fired.
Release Notes:
- Reduced main thread hangs under very high system load
Co-Authored-By: Mikayla <mikayla@zed.dev>
My Zed was running out with collab + chat + recent projects + two splits
on a large monitor
Release Notes:
- N/A
Co-authored-by: Mikayla <mikayla@zed.dev>
This PR adds a new tool to the `assistant2` crate that allows the
assistant to create a new buffer with some content.
Release Notes:
- N/A
---------
Co-authored-by: Nathan <nathan@zed.dev>
This PR restores the `Global` trait's status as a marker trait.
This was the original intent from #7095, when it was added, that had
been lost in #9777.
The purpose of the `Global` trait is to statically convey what types can
and can't be accessed as `Global` state, as well as provide a way of
restricting access to said globals.
For example, in the case of the `ThemeRegistry` we have a private
`GlobalThemeRegistry` that is marked as `Global`:
91b3c24ed3/crates/theme/src/registry.rs (L25-L34)
We're then able to permit reading the `ThemeRegistry` from the
`GlobalThemeRegistry` via a custom getter, while still restricting which
callers are able to mutate the global:
91b3c24ed3/crates/theme/src/registry.rs (L46-L61)
Release Notes:
- N/A
This should have fixed the problems that some users were reporting with
https://github.com/zed-industries/zed/pull/10695 .
The problem was with devices which send more than one valuator axis in a
single event whereas the original PR assumed there would only ever be
one axis per event. This version also does away with the complicated
device selection and instead just uses the master pointer device, which
automatically uses all sub-pointers.
Edit: Confirmed working for one of the user's which the first attempt
was broken for.
Release Notes:
- Added smooth scrolling for X11 on Linux
- Added horizontal scrolling for X11 on Linux
fixes https://github.com/zed-industries/zed/issues/9132
By setting the app id, window managers like `sway` can apply custom
configuration like `for_window [app_id="zed"] floating enable`.
Tested using `wlprop`/`hyprctl activewindow` for wayland, `xprop` for
x11.
Release Notes:
- Zed now sets the window app id / class, which can be used e.g. in
window managers like `sway`/`i3` to define custom rules
The culprit behind ghost images in transparent windows and bad
performance with blurred windows turns out to be one and the same:
window shadows. The simplest and most popular fix appears to be to
simply disable shadows on non-opaque windows so let's just do that.
Disabling shadows on a window that is already visible however leaves the
shadow on screen, detached from the window, until a full screen effect
such as exposé or a virtual desktop switch wipes it clean. There does
not seem to be any known solution to this, and it does not affect
windows created after switching to a transparent theme so this is a good
enough compromise for now.
Release Notes:
- Fixed ghostly artifacts in transparent window backgrounds.
- Fixed sluggishness with blurred window backgrounds.
Oversight from #11015, where we added `PromptLevel::Destructive`, which
should be used when a prompt performs a "destructive" action (e.g.
deleting a file). However, we accidentally set `setHasDestructiveAction`
to `true` regardless of which prompt level would be specified
Release Notes:
- N/A
### fix cropping problem
Prior to these changes the images were being cropped so you never
actually saw
the full image but you had to use your mouse to make the window bigger
to see
both the text and the images...
### activate
```rust
cx.activate(true);
```
was not in place so the window did not appear when you ran the example
### No longer need to Ctrl-c to quit the example
Now you can hit *Cmd-q* to quit out of the example instead of having to
*Ctrl-c* in your
terminal where you fired off the example
Release Notes:
- N/A
We're planning to associate "selection sources" with global element ids
to allow arbitrary UI text to be selected in GPUI. Previously, global
ids were not exposed outside the framework and we entangled management
of the element id stack with element state access. This was more
acceptable when element state was the only place we used global element
ids, but now that we're planning to use them more places, it makes sense
to deal with element identity as a first-class part of the element
system. We now ensure that the stack of element ids which forms the
current global element id is correctly managed in every phase of element
layout and paint and make the global id available to each element
method. In a subsequent PR, we'll use the global element id as part of
implementing arbitrary selection for UI text.
Release Notes:
- N/A
---------
Co-authored-by: Antonio Scandurra <me@as-cii.com>
fixes#11048
## Problem
in the situation `press right`, `press left`, `release right` the
following happens right now:
- `keypressed right`, `current_keysym` is set to `right`
- `keypressed left`, `current_keysym` is set to `left`
the repeat timer runs asynchronously and emits keyrepeats since
`current_keysym.is_some()`
- `keyreleased right`, `current_keysym` is set to None
the repeat timer no longer emits keyrepeats
- `keyreleased left`, this is where `current_keysym` should actually be
set to None.
## Solution
Only reset `current_keysym` if the released key matches the last pressed
key.
Release Notes:
- N/A
* Otherwise is_maximized always returns `true`
Release Notes:
- Fixed maximized state. Tested with a dummy maximize/restore button
with the `zoom()` (not implemented yet). Without the right `maximized`,
in toggle zoom function is not possible to call `set_maximized()` or
`unset_maximized()`.
```rust
fn zoom(&self) {
if self.is_maximized() {
self.borrow_mut().toplevel.unset_maximized();
} else {
self.borrow_mut().toplevel.set_maximized();
}
}
```
This is a follow up of #10810 , `embed-resource` crate uses a different
method to link the manifest file, so this makes moving manifest file to
`gpui` possible.
Now, examples can run as expected:
TODO:
- [ ] check if it builds with gnu toolchain
Release Notes:
- N/A
Still TODO:
* Disable the new save-as for local projects
* Wire up sending the new path to the remote server
Release Notes:
- Added the ability to "Save-as" in remote projects
---------
Co-authored-by: Nathan <nathan@zed.dev>
Co-authored-by: Bennet <bennetbo@gmx.de>
The new `ElementContext` was originally introduced to ensure the element
APIs could only be used inside of elements. Unfortunately, there were
many places where some of those APIs needed to be used, so
`WindowContext::with_element_context` was introduced, which defeated the
original safety purposes of having a specific context for elements.
This pull request merges `ElementContext` into `WindowContext` and adds
(debug) runtime checks to APIs that can only be used during certain
phases of element drawing.
Release Notes:
- N/A
---------
Co-authored-by: Nathan Sobo <nathan@zed.dev>
Release Notes:
- N/A
Picks up https://github.com/kvark/blade/pull/113 and a bunch of other
fixes.
Should prevent the exclusive full-screen on Vulkan - related to #9728
cc @kazatsuyu
Note: this PR doesn't enable transparency, this is left to follow-up
On my computer, I get `Yahei UI`, which makes sense since I'm using a
Chinese operating system, and `Yahei UI` includes Chinese codepoints. On
an English operating system, `Segoe UI` should be used instead.
Edit: I also choose to use the UI font selected by the system as the
fallback font, rather than hard-coding the `Arial` font.
Release Notes:
- N/A
This removes the manual calls to `scroll_to_reveal_item` in the new
assistant, as they are superseded by the new autoscrolling behavior of
the `List` when the editor requests one.
Release Notes:
- N/A
This is a crate only addition of a new version of the AssistantPanel.
We'll be putting this behind a feature flag while we iron out the new
experience.
Release Notes:
- N/A
---------
Co-authored-by: Nathan Sobo <nathan@zed.dev>
Co-authored-by: Antonio Scandurra <me@as-cii.com>
Co-authored-by: Conrad Irwin <conrad@zed.dev>
Co-authored-by: Marshall Bowers <elliott.codes@gmail.com>
Co-authored-by: Antonio Scandurra <antonio@zed.dev>
Co-authored-by: Nate Butler <nate@zed.dev>
Co-authored-by: Nate Butler <iamnbutler@gmail.com>
Co-authored-by: Max Brunsfeld <maxbrunsfeld@gmail.com>
Co-authored-by: Max <max@zed.dev>
This pull request introduces the new
`ElementContext::request_autoscroll(bounds)` and
`ElementContext::take_autoscroll()` methods in GPUI. These new APIs
enable container elements such as `List` to change their scroll position
if one of their children requested an autoscroll. We plan to use this in
the revamped assistant.
As a drive-by, we also:
- Renamed `Element::before_layout` to `Element::request_layout`
- Renamed `Element::after_layout` to `Element::prepaint`
- Introduced a new `List::splice_focusable` method to splice focusable
elements into the list, which enables rendering offscreen elements that
are focused.
Release Notes:
- N/A
---------
Co-authored-by: Nathan <nathan@zed.dev>
This PR includes two relevant changes:
- Platform binds (super, windows, cmd) will now parse on all platforms,
regardless of which one is being used. While very counter-intuitive
(this means that `cmd-d` will actually be triggered by `win-d` on
windows) this makes it possible to reuse keymap files across platforms
easily
- There is now a KeyContext `os == linux`, `os == macos` or `os ==
windows` available in keymaps. This allows users to specify certain
blocks of keybinds only for one OS, allowing you to minimize the amount
of keymappings that you have to re-configure for each platform.
Release Notes:
- Added `os` KeyContext, set to either `linux`, `macos` or `windows`
- Fixed keymap parsing errors when `cmd` was used on linux, `super` was
used on mac, etc.
Reverts zed-industries/zed#10695
Some users are experiencing broken scrolling due to the changes from
this PR, so it should be reverted while I investigate what causes the
problems.
Release Notes:
- N/A
~~This is extracted from #10643.~~
~~It looks like the editor had a small optimization to drop events when
hovering the gutter. This also happens while dragging a tab over the
gutter, and causes some stuttering. Please correct me if this wasn't
just a small optimization, but I could not derive a different reason for
this code to exist.~~
The window was waiting for event propagation to update any drag. This
change makes sure the drag always gets updated, which makes sure it will
always be fluid, no matter if any element stops event propagation. Ty
@as-cii for pointing me to a better solution!
Release Notes:
- Fixed issue where dragging tab over any element that stops event
propagation would stutter
Changes the X11 platform code to use the xinput extension which allows
for smooth scrolling and horizontal scrolling.
Release Notes:
- Added smooth scrolling to X11 on Linux
- Added horizontal scrolling to X11 on Linux
By default NSWindow's release themselves when closed, which doesn't
interact well with rust's lifetime system.
Disable that behaviour, and explicitly release the NSWindow when the
window handle is dropped.
Release Notes:
- Fixed a (rare) panic when closing a window.
Fixes the cursor not updating when (a) switching windows from another
program via a shortcut and (b) when cursor updates were triggered by
something other than moving the mouse (e.g. when scrolling or pressing a
key).
Release Notes:
- N/A
This fixes a bug that caused the editor to be rendered incorrectly when
its bounds extended outside the content mask. This is because the editor
uses the returned `Hitbox` bounds to determine the origin of its
elements.
With this commit, we will now store a new `content_mask` field within
the `Hitbox` struct which is captured when the hitbox is inserted. Then,
the content mask is applied on the fly when performing a hit test to
determine whether the hitbox is actually hovered.
Release Notes:
- N/A
This PR adjusts our scrolling implementation to delay the generation of
ScrollWheel events until we receive a complete frame.
Note that our implementation is still a bit off-spec, as we don't delay
any other kind of events. But it's been working so far on a variety of
compositors and the other events contain complete data; so I'll hold off
on that refactor for now.
Release Notes:
- N/A
https://crates.io/crates/block implies this is necessary, and we're
still seeing segfaults in this method, so...
Release Notes:
- Fixed a panic when installing the CLI / registering for the zed://
protocol
A subsequent update introduced the `HMONITOR` value to the
`WindowsDisplay` struct, eliminating the need for polling to retrieve
this value.
Release Notes:
- N/A
This introduces semantic indexing in Zed based on chunking text from
files in the developer's workspace and creating vector embeddings using
an embedding model. As part of this, we've created an embeddings
provider trait that allows us to work with OpenAI, a local Ollama model,
or a Zed hosted embedding.
The semantic index is built by breaking down text for known
(programming) languages into manageable chunks that are smaller than the
max token size. Each chunk is then fed to a language model to create a
high dimensional vector which is then normalized to a unit vector to
allow fast comparison with other vectors with a simple dot product.
Alongside the vector, we store the path of the file and the range within
the document where the vector was sourced from.
Zed will soon grok contextual similarity across different text snippets,
allowing for natural language search beyond keyword matching. This is
being put together both for human-based search as well as providing
results to Large Language Models to allow them to refine how they help
developers.
Remaining todo:
* [x] Change `provider` to `model` within the zed hosted embeddings
database (as its currently a combo of the provider and the model in one
name)
Release Notes:
- N/A
---------
Co-authored-by: Nathan Sobo <nathan@zed.dev>
Co-authored-by: Antonio Scandurra <me@as-cii.com>
Co-authored-by: Conrad Irwin <conrad@zed.dev>
Co-authored-by: Marshall Bowers <elliott.codes@gmail.com>
Co-authored-by: Antonio <antonio@zed.dev>
This introduces a new API on `StatefulInteractiveElement` to create a
tooltip that can be hovered, scrolled inside, and clicked:
`.hoverable_tooltip`.
Right now we only use it in the `git blame` gutter, but the plan is to
use the new hover/click/scroll behavior in #10398 to introduce new
git-blame-tooltips.
Release Notes:
- N/A
---------
Co-authored-by: Antonio <antonio@zed.dev>
With the recent Linux rewrite, I attempted to simplify the number of
wrapper structs involved in the Linux code, following the macOS code as
an example. Unfortunately, I missed a vital component: pointers to the
platform state, held by platform data structures. As we hold all of the
platform data structures on Linux, this PR reintroduces a wrapper around
the internal state of both the platform and the window. This allows us
to close and drop windows correctly.
This PR also fixes a performance problem introduced by:
https://github.com/zed-industries/zed/pull/10343, where each configure
request would add a new frame callback quickly saturating the main
thread and slowing everything down.
Release Notes:
- N/A
This PR implements the preview tabs feature from VSCode.
More details and thanks for the head start of the implementation here
#6782.
Here is what I have observed from using the vscode implementation ([x]
-> already implemented):
- [x] Single click on project file opens tab as preview
- [x] Double click on item in project panel opens tab as permanent
- [x] Double click on the tab makes it permanent
- [x] Navigating away from the tab makes the tab permanent and the new
tab is shown as preview (e.g. GoToReference)
- [x] Existing preview tab is reused when opening a new tab
- [x] Dragging tab to the same/another panel makes the tab permanent
- [x] Opening a tab from the file finder makes the tab permanent
- [x] Editing a preview tab will make the tab permanent
- [x] Using the space key in the project panel opens the tab as preview
- [x] Handle navigation history correctly (restore a preview tab as
preview as well)
- [x] Restore preview tabs after restarting
- [x] Support opening files from file finder in preview mode (vscode:
"Enable Preview From Quick Open")
I need to do some more testing of the vscode implementation, there might
be other behaviors/workflows which im not aware of that open an item as
preview/make them permanent.
Showcase:
https://github.com/zed-industries/zed/assets/53836821/9be16515-c740-4905-bea1-88871112ef86
TODOs
- [x] Provide `enable_preview_tabs` setting
- [x] Write some tests
- [x] How should we handle this in collaboration mode (have not tested
the behavior so far)
- [x] Keyboard driven usage (probably need workspace commands)
- [x] Register `TogglePreviewTab` only when setting enabled?
- [x] Render preview tabs in tab switcher as italic
- [x] Render preview tabs in image viewer as italic
- [x] Should this be enabled by default (it is the default behavior in
VSCode)?
- [x] Docs
Future improvements (out of scope for now):
- Support preview mode for find all references and possibly other
multibuffers (VSCode: "Enable Preview From Code Navigation")
Release Notes:
- Added preview tabs
([#4922](https://github.com/zed-industries/zed/issues/4922)).
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
Currently in Zed, certain characters require pressing the key twice to
move the caret through that character. For example: "❤️" and "y̆".
The reason for this is as follows:
Currently, Zed uses `chars` to distinguish different characters, and
calling `chars` on `y̆` will yield two `char` values: `y` and `\u{306}`,
and calling `chars` on `❤️` will yield two `char` values: `❤` and
`\u{fe0f}`.
Therefore, consider the following scenario (where ^ represents the
caret):
- what we see: ❤️ ^
- the actual buffer: ❤ \u{fe0f} ^
After pressing the left arrow key once:
- what we see: ❤️ ^
- the actual buffer: ❤ ^ \u{fe0f}
After pressing the left arrow key again:
- what we see: ^ ❤️
- the actual buffer: ^ ❤ \u{fe0f}
Thus, two left arrow key presses are needed to move the caret, and this
PR fixes this bug (or this is actually a feature?).
I have tried to keep the scope of code modifications as minimal as
possible. In this PR, Zed handles such characters as follows:
- what we see: ❤️ ^
- the actual buffer: ❤ \u{fe0f} ^
After pressing the left arrow key once:
- what we see: ^ ❤️
- the actual buffer: ^ ❤ \u{fe0f}
Or after pressing the delete key:
- what we see: ^
- the actual buffer: ^
Please note that currently, different platforms and software handle
these special characters differently, and even the same software may
handle these characters differently in different situations. For
example, in my testing on Chrome on macOS, GitHub treats `y̆` as a
single character, just like in this PR; however, in Rust Playground,
`y̆` is treated as two characters, and pressing the delete key does not
delete the entire `y̆` character, but instead deletes `\u{306}` to yield
the character `y`. And they both treat `❤️` as a single character,
pressing the delete key will delete the entire `❤️` character.
This PR is based on the principle of making changes with the smallest
impact on the code, and I think that deleting the entire character with
the delete key is more intuitive.
Release Notes:
- Fix caret movement issue for some special characters
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
Co-authored-by: Thorsten <thorsten@zed.dev>
Co-authored-by: Bennet <bennetbo@gmx.de>
This PR renames `language::Buffer::new` to `language::Buffer::local` and
simplifies its interface. Instead of taking a replica id (which should
always be 0 for the local case) and a `BufferId`, which was awkward and
verbose to construct, it simply takes text and a `cx`.
It uses the `cx` to derive a `BufferId` from the `EntityId` associated
with the `cx`, which should always be positive based on the following
analysis...
We convert the entity id to a u64 using this method on `EntityId`, which
is defined by macros in the `slotmap` crate:
```rust
pub fn as_ffi(self) -> u64 {
(u64::from(self.version.get()) << 32) | u64::from(self.idx)
}
```
If you look at the type of `version` in `KeyData`, it is non-zero:
```rust
#[derive(Clone, Copy, PartialEq, Eq, PartialOrd, Ord, Hash)]
pub struct KeyData {
idx: u32,
version: NonZeroU32,
}
```
This commit also adds `Context::reserve_model` and
`Context::insert_model` to determine a model's entity ID before it is
created, which we need in order to assign a `BufferId` in the background
when loading a buffer asynchronously.
Release Notes:
- N/A
---------
Co-authored-by: Piotr Osiewicz <24362066+osiewicz@users.noreply.github.com>
This fixes certain shortcuts/motions on X11 like in vim mode "v i )",
where previously zed would interpret it as "v i SHIFT )" due to the x11
backend emitting key press events for modifier keys even though other
platforms like Wayland don't. This also adds support for
ModifiersChanged events to X11
Release Notes:
- Fixed vim motions like "v i )" not working on X11
([#10199](https://github.com/zed-industries/zed/issues/10199)).
Release Notes:
- N/A
Picks up https://github.com/kvark/blade/pull/105,
https://github.com/kvark/blade/pull/97, and more
Switches the presentation to be non-blocking, which will improve the
latency slightly.
Allows to start playing with GLES backend, e.g.
```bash
cd crates/gpui
RUSTFLAGS="--cfg gles" CARGO_TARGET_DIR=./target-gl cargo run --example hello_world
```
It doesn't currently render properly due to an issue that needs
investigation, see
https://github.com/kvark/blade/pull/105#issuecomment-2041006542
But at least it's a start
Co-authored-by: Mikayla Maki <mikayla@zed.dev>
This fixes a bug in https://github.com/zed-industries/zed/pull/9818,
where the status was not removed if the request failed. It also adds
replication of these new status messages to guests when collaborating.
Release Notes:
- Fixed an issue where the status of failed LSP actions was left in the
status bar
---------
Co-authored-by: Marshall <marshall@zed.dev>
Co-authored-by: Marshall Bowers <elliott.codes@gmail.com>
To reference the system font, use the special ".SystemUIFont" family
name.
/cc @PixelJanitor
Release Notes:
- Switched to the system UI font for user interface elements on macOS.
Co-authored-by: Antonio Scandurra <antonio@zed.dev>
Fixed#10149
A user had Zed crash due to invalid font size in settings. It turned out
the width/height of glyphs does not pass validation in Metal texture
initialization with a large enough font size.
All modern Macs have a max texture width/height of 16kB (barring Apple
A8, used by iPhone 6 back in 2014, which uses 8kB). This commit clamps
texture size at 16kB. Note that while it fixes Zed crash, using a font
size that hits the limit is still pretty unusable - the users will still
have a pretty unusable editor, but at least it won't crash for them.
Release Notes:
- Fixed crashes with huge `buffer_font_size` values.
This puts the Linux platform implementation at a similar code style and
quality to the macOS platform. The largest change is that I collapsed
the `LinuxPlatform` -> `[Backend]` -> `[Backend]State` ->
`[Backend]StateInner` to just `[Backend]` and `[Backend]State`, and in
the process removed most of the `Rc`s and `RefCell`s.
TODO:
- [x] Make sure that this is on-par with the existing implementation
- [x] Review in detail, now that the large changes are done.
- [ ] Update the roadmap
Release Notes:
- N/A
Co-Authored-By: Kirill <kirill@zed.dev>
Release Notes:
- Fixed panic when dragging into Zed.
Optionally, include screenshots / media showcasing your addition that
can be included in the release notes.
**or**
- N/A
Co-authored-by: Kirill <kirill@zed.dev>
While working towards fixes for the image viewer, @mikayla-maki and I
discovered that we didn't have `object-fit: scale-down` implemented.
This doesn't _fully_ solve the image issues as there is some issue where
only the bounds width is updating on layout change that I haven't fully
chased down.
Co-Authored-By: @mikayla-maki
Release Notes:
- N/A
---------
Co-authored-by: Mikayla Maki <mikayla@zed.dev>
Refs #9647
Fixes https://github.com/zed-industries/zed/issues/9792
This pull request moves the computation of scrollbar markers off the
main thread, to prevent them from grinding the editor to a halt when we
have a lot of them (e.g., when there are lots of search results on a
large file). With these changes we also avoid generating multiple quads
for adjacent markers, thus fixing an issue where we stop drawing other
primitives because we've drawn too many quads in the scrollbar.
Release Notes:
- Improved editor performance when displaying lots of search results,
diagnostics, or symbol highlights in the scrollbar
([#9792](https://github.com/zed-industries/zed/issues/9792)).
---------
Co-authored-by: Antonio Scandurra <me@as-cii.com>
Co-authored-by: Nathan <nathan@zed.dev>
Due to: https://github.com/zed-industries/zed/issues/9985 and an
abundance of caution, I'm reverting the image and svg rendering updates
for now until we can debug the issue. cc: @niklaswimmer
Release Notes:
- N/A
This reverts https://github.com/zed-industries/zed/pull/8327
That PR introduced a regression where completions' syntax highlighting
would be corrupted in a non-deterministic way, such that it varied from
frame to frame:
In the screenshot below, many of the field names (e.g. `cursor`,
`depth`) are incorrectly colored as types instead of fields. The
`finished_states` field has highlighting that changes at the wrong
offset. All of these values changed from frame to frame, creating a
strange flickering effect:
<img width="599" alt="Screenshot 2024-04-01 at 5 56 36 PM"
src="https://github.com/zed-industries/zed/assets/326587/b6a48f02-f146-4f76-92e6-32fb417d86c0">
Release Notes:
- N/A
This fixes#9928 by invalidating the tooltip on mouse scroll.
I think _ideally_ we'd have a solution that only invalidates it if,
after mouse scroll, we're not hovering over the element. But I tried
that (by essentially duplicating the code for `MouseMoveEvent` but that
lead to some inconsistencies. I think we don't redraw when we finish
scrolling.
This now behaves exactly like tooltips in Chrome: invalidate on scroll,
move mouse again to trigger the tooltip.
It also behaves like the hover tooltips in the editor.
https://github.com/zed-industries/zed/assets/1185253/05b9170e-414c-4453-84e5-90510b943c15
Release Notes:
- N/A
Reverts zed-industries/zed#9768
That change didn't seem necessary and it made symbols that need a key
shortcut to be written (e.g. SHIFT + 2 for a quote) infinitely repeat.
Release Notes:
- N/A
This PR hoists the `profile.dev.package` settings for compiling the
`resvg` crate with optimizations up to the workspace level, since Cargo
was complaining:
```
warning: profiles for the non root package will be ignored, specify profiles at the workspace root:
package: /Users/maxdeviant/projects/zed/crates/gpui/Cargo.toml
workspace: /Users/maxdeviant/projects/zed/Cargo.toml
```
Release Notes:
- N/A
Closes#10017. While reworking the `overlay` element in #9911, I did not
realize that all overlay elements called `defer_draw` with a priority of
`1`.
/cc @as-cii
Not including release notes, since it was only present in nightly.
Release Notes:
- N/A
PR: #9931 broke image scaling, such that it ignores the object-fit
parameter and instead always scales the image to fit the bounds. This
fixes the regression.
This is a follow up to #9436 . It has a cleaner API and generalized the
image_cache to be a generic asset cache, that all GPUI elements can make
use off. The changes have been discussed with @mikayla-maki on Discord.
---------
Co-authored-by: Mikayla <mikayla@zed.dev>
@SomeoneToIgnore This code should 100% work for future Zed users, but
for current Zed users, Zed's internal list of recents may not be synced
w/ macOS' Recent Documents at first. If needed this can be fixed by
calling `cx.refresh_recent_documents` on startup, but that feels a bit
unnecessary.
Release Notes:
- Fixes behavior of Recent Documents list on macOS
This PR extracts the `SemanticVersion` out of `util` and into its own
`SemanticVersion` crate.
This allows for making use of `SemanticVersion` without needing to pull
in some of the heavier dependencies included in the `util` crate.
As part of this the public API for `SemanticVersion` has been tidied up
a bit.
Release Notes:
- N/A
There was a problem using deferred draws with `overlay` and tooltips at
the same time.
The `overlay` element was removed and was split up into two separate
elements
- `deferred`
- `anchored` - Mimics the `overlay` behavior but does not render its
children as deferred
`tooltip_container` does not defer its drawing anymore and only uses
`anchored`.
/cc @as-cii
Release Notes:
- Fixed tooltip for the recent projects popover not showing anymore
---------
Co-authored-by: Antonio <antonio@zed.dev>
This adds a new action to the editor: `editor: toggle git blame`. When
used it turns on a sidebar containing `git blame` information for the
currently open buffer.
The git blame information is updated when the buffer changes. It handles
additions, deletions, modifications, changes to the underlying git data
(new commits, changed commits, ...), file saves. It also handles folding
and wrapping lines correctly.
When the user hovers over a commit, a tooltip displays information for
the commit that introduced the line. If the repository has a remote with
the name `origin` configured, then clicking on a blame entry opens the
permalink to the commit on the code host.
Users can right-click on a blame entry to get a context menu which
allows them to copy the SHA of the commit.
The feature also works on shared projects, e.g. when collaborating a
peer can request `git blame` data.
As of this PR, Zed now comes bundled with a `git` binary so that users
don't have to have `git` installed locally to use this feature.
### Screenshots
### TODOs
- [x] Bundling `git` binary
### Release Notes
Release Notes:
- Added `editor: toggle git blame` command that toggles a sidebar with
git blame information for the current buffer.
---------
Co-authored-by: Antonio <antonio@zed.dev>
Co-authored-by: Piotr <piotr@zed.dev>
Co-authored-by: Bennet <bennetbo@gmx.de>
Co-authored-by: Mikayla <mikayla@zed.dev>
Updated version of #9741 with fixes for the problems raised in #9774. I
only verified that the images no longer look blueish on Linux, because I
don't have a Mac.
cc @osiewicz
Release Notes:
- N/A
---------
Signed-off-by: Niklas Wimmer <mail@nwimmer.me>
Sharing a project displays a notification (window) on every screen.
Previously there was an issue with the positioning of windows on all
screens except the primary screen.
As you can see here:
Now:
@mikayla-maki and I also decided to refactor the `WindowOptions` a bit.
Previously you could specify bounds which controlled the positioning and
size of the window in the global coordinate space, while also providing
a display id (which screen to show the window on). This can lead to
unusual behavior because you could theoretically specify a global bound
which does not even belong to the display id which was provided.
Therefore we changed the api to this:
```rust
struct WindowOptions {
/// The bounds of the window in screen coordinates
/// None -> inherit, Some(bounds) -> set bounds.
pub bounds: Option<Bounds<DevicePixels>>,
/// The display to create the window on, if this is None,
/// the window will be created on the main display
pub display_id: Option<DisplayId>,
}
```
This lets you specify a display id, which maps to the screen where the
window should be created and bounds relative to the upper left of the
screen.
Release Notes:
- Fixed positioning of popup windows (e.g. when sharing a project) when
using multiple external displays.
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
~~This is still a work in progress, but to show the public where I am
working on it~~ Ready for review
TODO:
- [x] Justify fullscreen size to display
- [x] Record and apply restored size
Release Notes:
- N/A
This pull request introduces a new `InlineCompletionProvider` trait,
which enables making `Editor` copilot-agnostic and lets us push all the
copilot functionality into the `copilot_ui` module. Long-term, I would
like to merge `copilot` and `copilot_ui`, but right now `project`
depends on `copilot`, which makes this impossible.
The reason for adding this new trait is so that we can experiment with
other inline completion providers and swap them at runtime using config
settings.
Please, note also that we renamed some of the existing copilot actions
to be more agnostic (see release notes below). We still kept the old
actions bound for backwards-compatibility, but we should probably remove
them at some later version.
Also, as a drive-by, we added new methods to the `Global` trait that let
you read or mutate a global directly, e.g.:
```rs
MyGlobal::update(cx, |global, cx| {
});
```
Release Notes:
- Renamed the `copilot::Suggest` action to
`editor::ShowInlineCompletion`
- Renamed the `copilot::NextSuggestion` action to
`editor::NextInlineCompletion`
- Renamed the `copilot::PreviousSuggestion` action to
`editor::PreviousInlineCompletion`
- Renamed the `editor::AcceptPartialCopilotSuggestion` action to
`editor::AcceptPartialInlineCompletion`
---------
Co-authored-by: Nathan <nathan@zed.dev>
Co-authored-by: Kyle <kylek@zed.dev>
Co-authored-by: Kyle Kelley <rgbkrk@gmail.com>
Quick fix that fixes key repeat not working when releasing a different
key than the current one being held
Don't really know much rust yet, so unsure this is the best way to
handle this, but this does seem like a good starting point to get at
least a tad familiar with it
Release Notes:
- N/A
Separate from #9451
On Windows, a new window may already active immediate after creation.
Release Notes:
- N/A
---------
Co-authored-by: Mikayla <mikayla@zed.dev>
mouse scroll wasn't working unless the window was maximized or in the
top left corner because the Windows wheel events give screen coordinates
Release Notes:
- N/A
That's nicer & more readable.
(I just noticed that this looks weird while trying to understand why zed
changes my cursor, so decided to make a quick fix (btw the issue with
the cursor is that zed always loads cursor named "default" on wayland))
Release Notes:
- N/A
---------
Co-authored-by: Marshall Bowers <elliott.codes@gmail.com>
The same changes have been used on linux here 5003504031
and here 34832d49b09071846ff6f55f8ca1df019980a1df.
Signed-off-by: Niklas Wimmer <mail@nwimmer.me>
The latest update to resvg bumped some transitive dependencies
which lead to duplicates. The update to the image dependency
unifies most of their versions again.
Most notably, gif and kurbo are still duplicated, which is best fixed
downstream however.
Signed-off-by: Niklas Wimmer <mail@nwimmer.me>
This removes bindgen and cbindgen from the dependency graph on non-macos
systems, improving compile times on those systems.
Signed-off-by: Niklas Wimmer <mail@nwimmer.me>
Now `Zed` can display icons. The image below shows the icon of the
`zed.exe` file and the icon in the right-click properties.
I used the `crates\zed\resources\app-icon@2x.png` file to generate the
`.ico` file. Due to some blank space around the logo in the original
file, the logo appears slightly smaller on Windows compared to other
software.
The current `.ico` file contains logo files of multiple sizes: 16x16,
24x24, 32x32, 48x48, 64x64, 96x96, 128x128, 256x256, 512x512.
Release Notes:
- N/A
The logging of WM_PAINT for each frame was not very meaningful, so it
was eliminated.
Other logging levels were also reduced to trace.
Release Notes:
- N/A
Co-authored-by: Mikayla Maki <mikayla@zed.dev>
This PR builds off of an earlier version of
https://github.com/zed-industries/zed/pull/9595, rearranges some of the
logic, and removes an unused platform API.
Release Notes:
- N/A
---------
Co-authored-by: apricotbucket28 <agustin.nicolas.marcos@outlook.com>
This PR adds support for handling action releases — events that
are fired when the user releases all the modifier keys that were part of
an action-triggering shortcut.
If the user holds modifiers and invokes several actions sequentially via
shortcuts (same or different), only the last action is "released" when
its modifier keys released.
~The following methods were added to `Div`:~
- ~`capture_action_release()`~
- ~`on_action_release()`~
- ~`on_boxed_action_release()`~
~They work similarly to `capture_action()`, `on_action()` and
`on_boxed_action()`.~
See the implementation details in [this
comment](https://github.com/zed-industries/zed/pull/8782#issuecomment-2009154646).
Release Notes:
- Added a fast-switch mode to the file finder: hit `p` or `shift-p`
while holding down `cmd` to select a file immediately. (#8258).
Related Issues:
- Implements #8757
- Implements #8258
- Part of #7653
Co-authored-by: @ConradIrwin
As I mentioned before, there are the following issues with how GPUI
handles scale factors greater than 1.0:
1. The title bar buttons do not function correctly, with minimizing
button performing maximization and maximizing button performing closure.
2. As discussed in #8809, setting a scale factor greater than 1.0 causes
GPUI's drawing content to be pushed off the screen.
This PR introduces `LogicalSize` and `PhysicalSize` to differentiate
between coordinate systems for proper GPUI rendering, and now scale
factors above 1.5 are working correctly.
`Zed` with a scale factor equals 1.5, and change between different scale
factors:
https://github.com/zed-industries/zed/assets/14981363/3348536d-8bd3-41dd-82f6-052723312a5b
Release Notes:
- N/A
I mainly focused on improving the `font_id` function, see the
description of e286483262 for more
details. The rest are some drive-by changes I could not resist to.
When I am right about af4d6c43ce, someone
with a Mac could change it there as well.
This PR is probably best reviewed commit by commit :)
cc @gabydd @h3mosphere
Release Notes:
- N/A
---------
Signed-off-by: Niklas Wimmer <mail@nwimmer.me>
This PR adjusts scrolling to be a lot faster on Linux and also makes
terminal scrolling work.
For Wayland, it makes scrolling faster by handling the `AxisValue120`
event (which also allows high-resolution scrolling on supported mice)
On X11, changed the 1 line per scroll to 3.
### Different solutions
I tried replicating Chromium's scrolling behaviour, but it was
inconsistent in X11/Wayland and found it too fast on Wayland. Plus, it
also didn't match VSCode, since it seems that they do something
different.
Release Notes:
- Made scrolling faster on Linux
- Made terminal scroll on Linux
Completes #7228.
Adds back Backspace as the main delete key binding and makes Linux
bindings consistent with macOS
Release Notes:
- ⌘-Delete/⌘-Backspace will now suppress deletion confirmation prompts
in project panel
([#7228](https://github.com/zed-industries/zed/issues/7228)).
This PR updates the `TextSystem` on macOS to allow loading the "Segoe
Fluent Icons" font.
We're using this font in the Storybook to render the `TitleBar` as it
would appear on Windows despite us running it on macOS. This is to make
things easier for iterating on UI design without needing to test on each
individual platform.
However, the "Segoe Fluent Icons" font does not have a glyph for the `m`
character, causing it to run afoul of a precautionary check added in
#4029, which ultimately results in the font not being loaded (and thus
rendering as a missing glyph).
We work around this by simply ignoring this check if the font we're
trying to load is specifically "Segoe Fluent Icons".
I think longer-term we'll need to revisit the behavior in the editor
that is causing the panics when the `m` glyph is missing from the font,
but that's a problem for a different day.
#### Before
<img width="1283" alt="Screenshot 2024-03-15 at 3 34 38 PM"
src="https://github.com/zed-industries/zed/assets/1486634/c0ddd46d-8599-4729-ac98-75522b33e25b">
#### After
<img width="1113" alt="Screenshot 2024-03-15 at 5 12 36 PM"
src="https://github.com/zed-industries/zed/assets/1486634/183c2b43-5e4f-4516-8856-7a2d45ed8b2e">
Note that you currently need to install the "Segoe Fluent Icons" font
yourself—either installing it globally or placing the `.ttf` file in the
`assets/fonts` directory—in order to see the icons rendered. I'd like to
look into getting this, but there are restrictions on the distribution
of the font on non-Windows platforms that will need to be followed.
Release Notes:
- N/A
This PR reverts https://github.com/zed-industries/zed/pull/9392 and
fixes the regressions that led to the reversion.
Release Notes:
- N/A
---------
Co-authored-by: Ezekiel Warren <ezekiel@seaube.com>
Release Notes:
- Added [object-fit
API](https://developer.mozilla.org/en-US/docs/Web/CSS/object-fit) to the
`img` element. This allows the user to decide how the image is scaled
within the element bounds.
- Fixes corner radius not working as expected on overflowing elements.
This reverts #9053 and #9375 because they introduced a regression on
`main` that broke the titlebars on macOS:
Two things are off:
- Left padding is missing
- Titlebar height is less than it was before, which means the
traffic-light buttons are not centered vertically
What @as-cii and I noticed while looking into this: the `cfg!(macos)`
macros that were used don't work like that. You need to check for
`cfg!(target = "macos")` etc. Means that on macOS we never used the
macOS-specific code because the condition was always false.
Overall height, we're not sure about.
Release Notes:
- N/A
Fixes https://github.com/zed-industries/zed/issues/9340
The flickering was caused by the pane trying to restore focus on a
`FocusHandle` that wasn't being rendered anymore. This commit uses the
new `WeakFocusHandle` to avoid retaining a reference to focus handles
that don't exist anymore.
Release Notes:
- Fixed a bug that caused flickering when interacting with the language
server logs
([#9340](https://github.com/zed-industries/zed/issues/9340)).
Using `Threadpool` and `TimerQueue` which are provided by the native
Windows APIs, to implement the corresponding interfaces, we do not need
to sort tasks ourselves as Windows will handle it in a relatively more
efficient manner, I guess. I am unsure if Zed would welcome this PR, and
suggestions are welcome.
Release Notes:
- N/A
Co-Authored-By: Max <max@zed.dev>
Co-Authored-By: Marshall <marshall@zed.dev>
Release Notes:
- Fixed a bug where text styles could leak between frames (preview only)
Co-authored-by: Max <max@zed.dev>
Co-authored-by: Marshall <marshall@zed.dev>
Tested on my laptop, and I've noticed that when I move the window,
`WindowsPlatform::displays()` is being continuously called. Is this
intended?
Release Notes:
- N/A
### Description
Currently, there are some issues with input handling on Windows:
#### 1. Direct crash when encountering IME input.
https://github.com/zed-industries/zed/assets/14981363/598f7272-1948-4a42-99c5-2ef7b9162a1e
#### 2. Handling messages every 1/60 seconds in the main thread. Despite
being named "immediate_handle," it's not exactly immediate.
```rust
// actually halt here
let wait_result =
unsafe { DCompositionWaitForCompositorClock(Some(&[self.inner.event]), INFINITE) };
// compositor clock ticked so we should draw a frame
if wait_result == 1 {
unsafe { invalidate_thread_windows(GetCurrentThreadId()) };
while unsafe { PeekMessageW(&mut msg, HWND::default(), 0, 0, PM_REMOVE) }.as_bool()
```
#### 3. According to Windows recommendations, character input should be
obtained using `WM_CHAR` instead of `WM_KEYDOWN`. Additionally, there
are problems with the handling within `WM_CHAR`.
```rust
fn handle_char_msg(&self, wparam: WPARAM) -> LRESULT {
let mut callbacks = self.callbacks.borrow_mut();
if let Some(callback) = callbacks.input.as_mut() {
let modifiers = self.current_modifiers();
let msg_char = wparam.0 as u8 as char; // these are u16 chars, cant treat them as u8
```
And, we don't handle `WM_SYSKEYDOWN` properly, which leads to `Alt + F4`
not working.
Release Notes:
- N/A
This avoids calling `window.setDelegate(nil)` when the window was
already closed.
Release Notes:
- Fixed a segfault that could show up when closing windows.
Co-authored-by: Antonio <antonio@zed.dev>
Before this change we didn't consistently trigger focus events when
toggling between with windows `Cmd-backtick`. We only triggered them
when the OS decided to trigger a redraw.
That lead to a nasty bug that showed up in Vim mode where a cursor would
still be active in the hidden window, even though it was deactivated.
One then had to manually try to trigger a focus event in the new window
to activate the cursor.
With this change, we call `cx.refresh` when the window activation status
changed which triggers focus events consistently and fixes this bug.
With logging we can observe this:
**BEFORE**:
https://github.com/zed-industries/zed/assets/1185253/e1ad8878-129c-44ba-9d8b-c720f9dca5b6
**AFTER**:
https://github.com/zed-industries/zed/assets/1185253/733fdadb-d1ea-47fe-a2c1-7b50af299cc0
Release Notes:
- Fixed focus not being consistently changed when switching between
multiple Zed windows via `Cmd-backtick`.
---------
Co-authored-by: Manu Raj <git@manuraj.dev>
Co-authored-by: Antonio <antonio@zed.dev>
Switch to using `x11rb` crate instead of current `xcb` crate for gpui's
x11 platform.
Also fixes the crash on resize, and white flashing on resize.
Release Notes:
- N/A
---------
Co-authored-by: Mikayla Maki <mikayla@zed.dev>
This PR changes GPUI to open windows with a default size and location,
and to otherwise inherit from their spawning window.
Note: The linux build now crashes on startup.
Release Notes:
- N/A
---------
Co-authored-by: Nathan <nathan@zed.dev>
Co-authored-by: Ezekiel Warren <zaucy@users.noreply.github.com>
Release Notes:
- N/A
This prevents a crash on sway (on older versions without fractional
scaling). This means the resize is delayed until the next this we
present a frame, we need to investigate if this is the correct this to
do.
Also, add a `deferred` function which takes an element to paint after
the current element tree.
Release Notes:
- Improved the size and position of the hitbox for resizing left, right,
and bottom panels.
([#8855](https://github.com/zed-industries/zed/issues/8855))
Co-authored-by: Julia <julia@zed.dev>
Co-authored-by: Nathan <nathan@zed.dev>
Previously, we were considering the mouse to be "out" of a div when its
hitbox wasn't hovered. However, if a parent listened for
"mouse_down_out" and a child occluded the parent, the parent would
always think the mouse was out even when the user clicked the child.
This commit changes the definition of "mouse out" to simply mean "does
not contain the point", without accounting for occlusion.
Release Notes:
- N/A
Co-authored-by: Julia <julia@zed.dev>
Fix panic caused by missing screen mode for specified crtc mode id #9105
by searching over all crtcs instead of using the first one which may be
invalid.
Fixes#9089.
On linux, pressing shift and tab together can potentially produce
`ISO_Left_Tab`. This PR maps this key to "tab" with the shift modifier,
similar to `SHIFT_TAB_KEY` in gpui::platform::mac::events.
Note: The [default linux
keymaps](https://github.com/zed-industries/zed/blob/main/assets/keymaps/default-linux.json)
have shift-tab mapped to editor::TabPrev and ctrl-[ mapped to
editor::Outdent. Both actions appear to have the same effect.
Release Notes:
- Support shift-tab on linux (#9089).
Release Notes:
- Fixed wayland cursor style handling
In upcoming Gnome 46, cursor icon names are considerably changing. For
example: this commit
74e9b79471
removed/modified a lot of cursor names. Then some of the names were
reintroduced in this commit
6f64dc55dc.
I also tried upcoming KDE Plasma 6. Some of the cursor names are not
used commonly between Gnome and KDE. From my analysis, these set of
cursor names should be more widely available in both previous and
upcoming release of Gnome and KDE.
Also, If a cursor style is not available, let's fallback to default
cursor style. This avoids scenarios where we get stuck with special
cursor styles like IBeam/Resize* because the current cursor style is not
available. This will lead to an unpleasant/broken experience. Falling
back to default cursor seems to be more acceptable.
On Windows, some windows may be created that are not managed by the
application.
For example, the Japanese IME creates pop-ups like this one.
<img width="325" alt="image"
src="https://github.com/zed-industries/zed/assets/6465609/503aaa0a-7568-485a-a138-e689ae67001c">
The internal data associated with such a window is different from
`WindowsWindowInner` and will crash if referenced.
Therefore, before calling `try_get_window_inner`, it checks if it is an
owned window.
Release Notes:
- N/A
This pull request fixes a couple of easy regressions we discovered right
after using #9012 on nightly:
- Popover buttons for a chat message were being occluded by the message
itself.
- Scrolling was not working on the `List` element.
Release Notes:
- N/A
See https://zed.dev/channel/gpui-536
Fixes https://github.com/zed-industries/zed/issues/9010
Fixes https://github.com/zed-industries/zed/issues/8883
Fixes https://github.com/zed-industries/zed/issues/8640
Fixes https://github.com/zed-industries/zed/issues/8598
Fixes https://github.com/zed-industries/zed/issues/8579
Fixes https://github.com/zed-industries/zed/issues/8363
Fixes https://github.com/zed-industries/zed/issues/8207
### Problem
After transitioning Zed to GPUI 2, we started noticing that interacting
with the mouse on many UI elements would lead to a pretty annoying
flicker. The main issue with the old approach was that hover state was
calculated based on the previous frame. That is, when computing whether
a given element was hovered in the current frame, we would use
information about the same element in the previous frame.
However, inspecting the previous frame tells us very little about what
should be hovered in the current frame, as elements in the current frame
may have changed significantly.
### Solution
This pull request's main contribution is the introduction of a new
`after_layout` phase when redrawing the window. The key idea is that
we'll give every element a chance to register a hitbox (see
`ElementContext::insert_hitbox`) before painting anything. Then, during
the `paint` phase, elements can determine whether they're the topmost
and draw their hover state accordingly.
We are also removing the ability to give an arbitrary z-index to
elements. Instead, we will follow the much simpler painter's algorithm.
That is, an element that gets painted after will be drawn on top of an
element that got painted earlier. Elements can still escape their
current "stacking context" by using the new `ElementContext::defer_draw`
method (see `Overlay` for an example). Elements drawn using this method
will still be logically considered as being children of their original
parent (for keybinding, focus and cache invalidation purposes) but their
layout and paint passes will be deferred until the currently-drawn
element is done.
With these changes we also reworked geometry batching within the
`Scene`. The new approach uses an AABB tree to determine geometry
occlusion, which allows the GPU to render non-overlapping geometry in
parallel.
### Performance
Performance is slightly better than on `main` even though this new
approach is more correct and we're maintaining an extra data structure
(the AABB tree).
Release Notes:
- Fixed a bug that was causing popovers to flicker.
---------
Co-authored-by: Nathan Sobo <nathan@zed.dev>
Co-authored-by: Thorsten <thorsten@zed.dev>
This PR simplifies the Zed file system abstraction and implements
`Fs::watch` for linux and windows.
TODO:
- [x] Figure out why this fails to initialize the file watchers when we
have to initialize the config directory paths, but succeeds on
subsequent runs.
- [x] Fix macOS dependencies on old fsevents::Event crate
Release Notes:
- N/A
Changes Zed CI to build and upload Linux nightly bundles.
* `todo!(linux)` are replaced with `TODO linux` to make `todo!`-based
workflows more convenient
* renames `run-build-dmg` label into `run-bundling`, also renames a few
GH Actions entries to be more generic
* make another upload path for Linux, which keeps a separate file with SHA to version the nightly artifact.
* adds a `*.deb` package building with a couple of caveats, marked with
new `TODO linux` entries:
1. `cargo-bundle` is not very flexible, so it generates artifacts with
the structure and names that we're unable to alter before/during the
generation.
For that, a set of extra steps is made by repacking the *.deb package —
this is not very portable between different Linux distros, so later one
needs to find a way to combine multiple package types in this script.
2. `cargo-bundle` is not able to properly generate the *.msi bundle
despite declaring it in the features:
https://github.com/burtonageo/cargo-bundle/issues/116
Windows needs to invent its own way of bundling or fix the tool.
3. Both `cli` and `zed` binaries are added into the archive under
`/usr/local/bin/` path with their `-$channel` suffix
(-nightly/-preview/-dev/-stable) and a `/usr/local/bin/zed ->
/usr/local/bin/cli-nightly` symlink is made to make CLI work as Zed
launcher:
```
~/work/zed kb/linux-nightly:origin/kb/linux-nightly* ❯ dpkg -c target/zed_amd64.deb
drwxr-xr-x allaptop/allaptop 0 2024-03-06 00:53 ./
drwxr-xr-x allaptop/allaptop 0 2024-03-06 00:53 ./usr/
drwxr-xr-x allaptop/allaptop 0 2024-03-06 00:53 ./usr/local/
drwxr-xr-x allaptop/allaptop 0 2024-03-06 00:53 ./usr/local/bin/
-rwxr-xr-x allaptop/allaptop 8746832 2024-03-06 00:53 ./usr/local/bin/cli-nightly
-rwxr-xr-x allaptop/allaptop 689078560 2024-03-06 00:53 ./usr/local/bin/zed-nightly
drwxr-xr-x allaptop/allaptop 0 2024-03-06 00:53 ./usr/share/
drwxr-xr-x allaptop/allaptop 0 2024-03-06 00:53 ./usr/share/applications/
-rw-r--r-- allaptop/allaptop 153 2024-03-06 00:53 ./usr/share/applications/zed.desktop
drwxr-xr-x allaptop/allaptop 0 2024-03-06 00:53 ./usr/share/icons/
drwxr-xr-x allaptop/allaptop 0 2024-03-06 00:53 ./usr/share/icons/hicolor/
drwxr-xr-x allaptop/allaptop 0 2024-03-06 00:53 ./usr/share/icons/hicolor/1024x1024@2x/
drwxr-xr-x allaptop/allaptop 0 2024-03-06 00:53 ./usr/share/icons/hicolor/1024x1024@2x/apps/
-rw-r--r-- allaptop/allaptop 716288 2024-03-06 00:53 ./usr/share/icons/hicolor/1024x1024@2x/apps/zed.png
drwxr-xr-x allaptop/allaptop 0 2024-03-06 00:53 ./usr/share/icons/hicolor/512x512/
drwxr-xr-x allaptop/allaptop 0 2024-03-06 00:53 ./usr/share/icons/hicolor/512x512/apps/
-rw-r--r-- allaptop/allaptop 239870 2024-03-06 00:53 ./usr/share/icons/hicolor/512x512/apps/zed.png
lrwxrwxrwx allaptop/allaptop 0 2024-03-06 00:53 ./usr/local/bin/zed -> /usr/local/bin/cli-nightly
```
But the CLI does not work under Linux yet and there's no way to install
that CLI from Zed now; Zed binary itself is not able to open
`file/location:12:34`-like things and set up the env properly, but is
able to start or open a directory.
So, this structure can be considered temporary and changed, if needed.
4. Zed Nightly on Linux does not know how to update itself, so all
nightly publishing is not picked up automatically.
5. Rust cache from `main` builds does not get shared between CI jobs,
due to being run in a different CI job that forms a different CI key, so
```
- name: Cache dependencies
uses: swatinem/rust-cache@v2
with:
save-if: ${{ false }}
```
would not work.
This makes Linux bundling jobs long.
Release Notes:
- N/A
Modifier keys are dispatched as events on wayland, unlike macos. This
prevents pending bindings from matching, because something like e.g. `g
shift-e` is received by the key matcher as `g shift shift-e`.
This adds a GPUI fallback for window prompts. Linux does not support
this feature by default, so we have to implement it ourselves.
This implementation also makes it possible for GPUI clients to override
the platform prompts with their own implementations.
This is just a first pass. These alerts are not keyboard accessible yet,
does not reflect the prompt level, they're implemented in-window, rather
than as popups, and the whole feature need a pass from a designer.
Regardless, this gets us one step closer to Linux support :)
<img width="650" alt="Screenshot 2024-03-06 at 5 58 08 PM"
src="https://github.com/zed-industries/zed/assets/2280405/972ebb55-fd1f-4066-969c-a87f63b22a6f">
Release Notes:
- N/A
Release Notes:
- N/A
`DoubleBuffered` is not currently very necessary because we only care
about a single field `OutputState::scale` but I think it can be useful
for other objects as it's a fairly common pattern in wayland.
For the moment the windows port has a single display with hard-coded
values.
This first PR is just to at least fetch the **actual size of the current
display**. The idea
is using this code as a first template to start getting familar with the
code base
and prepare the work for enumerating all displays.
